Zach PfefferSep 29, 20181 min readPictures of SW6 for every ZCU102 Zynq UltraScale+ MPSoC Boot ModeThis post shows pictures of setting SW6 on the ZCU102 to every boot mode that the Zynq UltraScale+ MPSoC supports. Files for post at [link].ReferencesTable info from the Zynq UltraScale+ Device Technical Reference Manual UG1085 (v1.8) August 3, 2018 at [link]The Xilinx graphic is from [link] ZCU102•Xilinx•Howto742 views0 commentsPost not marked as liked
This post shows pictures of setting SW6 on the ZCU102 to every boot mode that the Zynq UltraScale+ MPSoC supports. Files for post at [link].ReferencesTable info from the Zynq UltraScale+ Device Technical Reference Manual UG1085 (v1.8) August 3, 2018 at [link]The Xilinx graphic is from [link]
