Analysis of warning: %post(sysvinit-inittab-2.88dsf-r10.zcu102_zynqmp) scriptlet failed
This post analyzes the warning message seen when running petalinux-build on a ZCU102 on release 2018.2 it comes to a conclusion that differs from Xilinx’s.
Warning
WARNING: petalinux-user-image-1.0-r0 do_rootfs: [log_check] petalinux-user-image: found 1 warning message in the logfile:
[log_check] warning: %post(sysvinit-inittab-2.88dsf-r10.zcu102_zynqmp) scriptlet failed, exit status 1
Xilinx's Answer Record
Xilinx lists the following info in an Answer Record (AR) at [link]:
The post install scripts are deferred for the first run on target. These warnings can be ignored.
Further investigation
1. Get the recipe (petalinux-user-image-1.0-r0) and task (do_rootfs) from the message above or from typing grep warning ./build/build.log
| 2. Find log.task_order by typing **find . -name “log.task_order” | grep petalinux-user-image** to get all the tasks run: |
zpfeffer@z:~/plxprjs/xilinx-zcu102-2018.2$ find . -name "log.task_order" | grep petalinux-user-image
./build/tmp/work/zcu102_zynqmp-xilinx-linux/petalinux-user-image/1.0-r0/temp/log.task_order
3. Look at the file to get the specific log by typing cat build/tmp/work/zcu102_zynqmp-xilinx-linux/petalinux-user-image/1.0-r0/temp/log.task_order
zpfeffer@z:~/plxprjs/xilinx-zcu102-2018.2$ cat build/tmp/work/zcu102_zynqmp-xilinx-linux/petalinux-user-image/1.0-r0/temp/log.task_order
do_prepare_recipe_sysroot (20449): log.do_prepare_recipe_sysroot.20449
do_populate_lic (29532): log.do_populate_lic.29532
do_rootfs (21453): log.do_rootfs.21453
do_image_qa (27096): log.do_image_qa.27096
do_image (2248): log.do_image.2248
do_image_ext3 (8958): log.do_image_ext3.8958
do_image_ext4 (20981): log.do_image_ext4.20981
do_image_cpio (10318): log.do_image_cpio.10318
do_image_tar (7954): log.do_image_tar.7954
do_image_jffs2 (4299): log.do_image_jffs2.4299
do_image_complete (27999): log.do_image_complete.27999
do_rm_work (16259): log.do_rm_work.16259
4. Open the file and search for “warning” you’ll see:
Installing : sysvinit-inittab-2.88dsf-r10.zcu102_zynqmp 95/147
Running scriptlet: sysvinit-inittab-2.88dsf-r10.zcu102_zynqmp 95/147
warning: %post(sysvinit-inittab-2.88dsf-r10.zcu102_zynqmp) scriptlet failed, exit status 1
This is an error related to installing an RPM package. Type find . -name “sysvinit-inittab-2.88dsf-r10*“ to find the RPM: ./build/tmp/deploy/rpm/zcu102_zynqmp/sysvinit-inittab-2.88dsf-r10.zcu102_zynqmp.rpm
5. Type sudo apt install rpm
6. Type rpm -qp –scripts ./build/tmp/deploy/rpm/zcu102_zynqmp/sysvinit-inittab-2.88dsf-r10.zcu102_zynqmp.rpm
You’ll see:
zpfeffer@z:~/plxprjs/xilinx-zcu102-2018.2$ rpm -qp --scripts ./build/tmp/deploy/rpm/zcu102_zynqmp/sysvinit-inittab-2.88dsf-r10.zcu102_zynqmp.rpm
postinstall scriptlet (using /bin/sh):
# sysvinit-inittab - postinst
# run this on the target
if [ "x$D" = "x" ] && [ -e /proc/consoles ]; then
tmp="115200;ttyPS0 115200;hvc0"
for i in $tmp
do
j=`echo ${i} | sed -e s/^.*\;//g -e s/\:.*//g`
k=`echo ${i} | sed s/^.*\://g`
if [ -z "`grep ${j} /proc/consoles`" ]; then
if [ -z "${k}" ] || [ -z "`grep ${k} /proc/consoles`" ] || [ ! -e /dev/${j} ]; then
sed -i -e /^.*${j}\ /d -e /^.*${j}$/d /etc/inittab
fi
fi
done
kill -HUP 1
else
if [ "115200;ttyPS0 115200;hvc0" = "" ]; then
exit 0
else
exit 1
fi
fi
7. Type find . -name “petalinux-user-image*.bb” to locate the petalinux-user-image-1.0-r0.bb recipe:
zpfeffer@z:~/plxprjs/xilinx-zcu102-2018.2$ find . -name "petalinux-user-image*.bb"
./project-spec/meta-plnx-generated/recipes-core/images/petalinux-user-image.bb
8. The file contains:
DESCRIPTION = "PETALINUX image definition for Xilinx boards"
LICENSE = "MIT"
require recipes-core/images/petalinux-image-common.inc
inherit extrausers
IMAGE_LINGUAS = " "
IMAGE_INSTALL = "\
kernel-modules \
mtd-utils \
canutils \
openssh-sftp-server \
pciutils \
run-postinsts \
udev-extraconf \
packagegroup-core-boot \
packagegroup-core-ssh-dropbear \
tcf-agent \
bridge-utils \
hellopm \
"
EXTRA_USERS_PARAMS = "usermod -P root root;"
Which roughly corresponds to lines like this in build/tmp/work/zcu102_zynqmp-xilinx-linux/petalinux-user-image/1.0-r0/temp/log.do_rootfs
update-alternatives: Linking /home/zpfeffer/plxprjs/xilinx-zcu102-2018.2/build/tmp/work/zcu102_zynqmp-xilinx-linux/petalinux-user-image/1.0-r0/rootfs/sbin/nologin to /sbin/nologin.shadow
Installing : packagegroup-core-boot-1.0-r17.zcu102_zynqmp 101/147
Running scriptlet: tcf-agent-1.7.0+git0+23bd5a2c8b-r0.aarch64 102/147
Removing any system startup links for tcf-agent ...
Installing : tcf-agent-1.7.0+git0+23bd5a2c8b-r0.aarch64 102/147
Running scriptlet: tcf-agent-1.7.0+git0+23bd5a2c8b-r0.aarch64 102/147
Adding system startup for /home/zpfeffer/plxprjs/xilinx-zcu102-2018.2/build/tmp/work/zcu102_zynqmp-xilinx-linux/petalinux-user-image/1.0-r0/rootfs/etc/init.d/tcf-agent.
Installing : canutils-4.0.6-r0.aarch64 103/147
Installing : kernel-modules-4.14+xilinx+v2018.2+git0+ad4cd988 104/147
Installing : packagegroup-core-ssh-dropbear-1.0-r1.noarch 105/147
Installing : udev-extraconf-1.1-r0.aarch64 106/147
Installing : bridge-utils-1.5-r0.aarch64 107/147
Running scriptlet: bridge-utils-1.5-r0.aarch64 107/147
update-alternatives: Linking /home/zpfeffer/plxprjs/xilinx-zcu102-2018.2/build/tmp/work/zcu102_zynqmp-xilinx-linux/petalinux-user-image/1.0-r0/rootfs/usr/sbin/brctl to /usr/sbin/brctl.bridge-utils
Installing : mtd-utils-2.0.0-r0.aarch64 108/147
Installing : openssh-sftp-server-7.5p1-r0.aarch64 109/147
Running scriptlet: run-postinsts-1.0-r9.noarch 110/147
Removing any system startup links for run-postinsts ...
Installing : run-postinsts-1.0-r9.noarch 110/147
Running scriptlet: run-postinsts-1.0-r9.noarch 110/147
Adding system startup for /home/zpfeffer/plxprjs/xilinx-zcu102-2018.2/build/tmp/work/zcu102_zynqmp-xilinx-linux/petalinux-user-image/1.0-r0/rootfs/etc/init.d/run-postinsts.
Installing : hellopm-0.1-r0.zynqmp 111/147
Installing : update-rc.d-0.7-r5.noarch 112/147
Running scriptlet: busybox-inetd-1.24.1-r0.aarch64 113/147
update-rc.d: /home/zpfeffer/plxprjs/xilinx-zcu102-2018.2/build/tmp/work/zcu102_zynqmp-xilinx-linux/petalinux-user-image/1.0-r0/rootfs/etc/init.d/inetd.busybox exists during rc.d purge (continuing)
9. recipes-core/images/petalinux-image-common.inc is located in the PetaLinux Tools install directory: /opt/pkg/petalinux
zpfeffer@z:/opt/pkg/petalinux$ find . -name "petalinux-image-common.inc"
./components/yocto/source/arm/layers/meta-petalinux/recipes-core/images/petalinux-image-common.inc
./components/yocto/source/microblaze_lite/layers/meta-petalinux/recipes-core/images/petalinux-image-common.inc
./components/yocto/source/microblaze_full/layers/meta-petalinux/recipes-core/images/petalinux-image-common.inc
./components/yocto/source/aarch64/layers/meta-petalinux/recipes-core/images/petalinux-image-common.inc
Note 1: all of these files are the same
Note 2: this may be an indication of inefficiencies in the build system
10. In petalinux-image-common.inc the core-image class is inherited:
inherit core-image autologin
COMMON_FEATURES = " \
ssh-server-dropbear \
hwcodecs \
"
IMAGE_FEATURES += "${COMMON_FEATURES}"
COMMON_INSTALL = " \
openssh-sftp-server \
...
11. Back to build/tmp/work/zcu102_zynqmp-xilinx-linux/petalinux-user-image/1.0-r0/temp/log.do_rootfs:
At the top of the file is DEBUG: Executing python function extend_recipe_sysroot
The DEBUG: Executing python before the warning is do_rootfs. This implies that the environment that the scriptlet executes in may be built by the do_sysroot Python function:
DEBUG: Executing python function do_rootfs
NOTE: ###### Generate rootfs #######
NOTE: Executing '/home/zpfeffer/plxprjs/xilinx-zcu102-2018.2/build/tmp/work/zcu102_zynqmp-xilinx-linux/petalinux-user-image/1.0-r0/recipe-sysroot-native/usr/bin/createrepo_c --update -q /home/zpfeffer/plxprjs/xilinx-zcu102-2018.2/build/tmp/work/zcu102_zynqmp-xilinx-linux/petalinux-user-image/1.0-r0/oe-rootfs-repo' ...
NOTE: Added oe-repo repo from /home/zpfeffer/plxprjs/xilinx-zcu102-2018.2/build/tmp/work/zcu102_zynqmp-xilinx-linux/petalinux-user-image/1.0-r0/oe-rootfs-repo
oe-repo 26 MB/s | 1.0 MB 00:00
Last metadata expiration check: 0:00:01 ago on Fri 07 Sep 2018 01:19:46 PM UTC.
Metadata cache created.
NOTE: Added oe-repo repo from /home/zpfeffer/plxprjs/xilinx-zcu102-2018.2/build/tmp/work/zcu102_zynqmp-xilinx-linux/petalinux-user-image/1.0-r0/oe-rootfs-repo
Last metadata expiration check: 0:00:04 ago on Fri 07 Sep 2018 01:19:46 PM UTC.
Dependencies resolved.
================================================================================
Package Arch Version Repository
Size
================================================================================
Installing:
base-passwd aarch64 3.5.29-r0 oe-repo 7.0 k
bridge-utils aarch64 1.5-r0 oe-repo 16 k
...
Installing dependencies:
base-files zcu102_zynqmp 3.0.14-r89 oe-repo 12 k
bash aarch64 4.4-r0 oe-repo 358 k
busybox aarch64 1.24.1-r0 oe-repo 346 k
...
sysvinit aarch64 2.88dsf-r14 oe-repo 53 k
sysvinit-inittab zcu102_zynqmp 2.88dsf-r10 oe-repo 7.5 k
sysvinit-pidof aarch64 2.88dsf-r14 oe-repo 13 k
12. Back to rpm -qp –scripts ./build/tmp/deploy/rpm/zcu102_zynqmp/sysvinit-inittab-2.88dsf-r10.zcu102_zynqmp.rpm
zpfeffer@z:~/plxprjs/xilinx-zcu102-2018.2$ rpm -qp --scripts ./build/tmp/deploy/rpm/zcu102_zynqmp/sysvinit-inittab-2.88dsf-r10.zcu102_zynqmp.rpm
postinstall scriptlet (using /bin/sh):
# sysvinit-inittab - postinst
# run this on the target
if [ "x$D" = "x" ] && [ -e /proc/consoles ]; then
tmp="115200;ttyPS0 115200;hvc0"
for i in $tmp
do
j=`echo ${i} | sed -e s/^.*\;//g -e s/\:.*//g`
k=`echo ${i} | sed s/^.*\://g`
if [ -z "`grep ${j} /proc/consoles`" ]; then
if [ -z "${k}" ] || [ -z "`grep ${k} /proc/consoles`" ] || [ ! -e /dev/${j} ]; then
sed -i -e /^.*${j}\ /d -e /^.*${j}$/d /etc/inittab
fi
fi
done
kill -HUP 1
else
if [ "115200;ttyPS0 115200;hvc0" = "" ]; then
exit 0
else
exit 1
fi
fi
A break down of this script:
Path 1
if $D is empty and /proc/consoles exists then
for 115200;ttyPS0 and 11520;hvc0
set j to ttyPS0 for 115200;ttyPS0 then set j to hvc0 for 11520;hvc0 on the next iteration
set k to 115200;ttyPS0 then set k to11520;hvc0 on the next iteration
if ttyPS0 (or hvc0) isn’t in /proc/consoles then
if k is null or k isn’t in /proc/consoles or there doesn’t exist /dev/ttyPS0 or /dev/hvc0
then edit /etc/inittab in place and delete ttyPS0 or hv0 if it exists at all
i.e. if the console device doesn’t exist in the system, don’t use it in /etc/inittab
if $D is empty and /proc/consoles exists then restart init and re-read /etc/inittab
Path 2
if /proc/consoles doesn’t exist then return 1, which is what we see.
13. What inittab is installed into the rootfs?
There are 8 inittab files:
zpfeffer@z:/opt/pkg/petalinux$ find . -name "inittab"
./components/yocto/source/arm/layers/core/meta/recipes-core/sysvinit/sysvinit-inittab/inittab
./components/yocto/source/arm/layers/core/meta/recipes-core/busybox/files/inittab
./components/yocto/source/microblaze_lite/layers/core/meta/recipes-core/sysvinit/sysvinit-inittab/inittab
./components/yocto/source/microblaze_lite/layers/core/meta/recipes-core/busybox/files/inittab
./components/yocto/source/microblaze_full/layers/core/meta/recipes-core/sysvinit/sysvinit-inittab/inittab
./components/yocto/source/microblaze_full/layers/core/meta/recipes-core/busybox/files/inittab
./components/yocto/source/aarch64/layers/core/meta/recipes-core/sysvinit/sysvinit-inittab/inittab
./components/yocto/source/aarch64/layers/core/meta/recipes-core/busybox/files/inittab
Note 1: all of the sysvinit-inittab/inittab files are the same
Note 2: all of the files/inittab are the same
In both sysvinit-inittab/inittab and files/inittab there is no console mentioned.
Conclusion
Xilinx listed: The post install scripts are deferred for the first run on target. These warnings can be ignored.
...but based on my analysis, this is not accurate. The scriptlet appears to only run at the point the RPM is installed; this means that the scriptlet is not “deferred” for the first run of the target, its never run.
Assuming the analysis is correct, the warning can still be ignored in this case because the inittabs in the 2018.2 PetaLinux Tools release doesn’t contains any consoles.
References
