72950 - PetaLinux 2019.2 - Product Update Release Notes and Known Issues

Title

72950 - PetaLinux 2019.2 - Product Update Release Notes and Known Issues

Description

This Answer Record acts as the release notes for PetaLinux 2019.2 and contains links to information about resolved issues and updated collateral contained in this release.

Solution

BSPs supported for the 2019.2 PetaLinux Release

This table contains supported BSPs for Zynq-7000, MicroBlaze, and Zynq UltraScale+ MPSoC available on the Embedded Development download page.

Note: XY - Represents release year, Y - Represents release version.

Platform Variant BSP Name BSP Description
MicroBlaze AC701 xilinx-ac701-v20XY.Z-final.bsp This BSP contains two BSPs [AC701 lite, AC701 full].

Hardware (AC701 lite): Design contains MicroBlaze Processor, core peripherals UART_lite, Ethernet Lite, AXI I2C, AXI GPIO, AXI DDR controller, SPI flash, led_4bits.
AC701 lite contains the AXI Lite IPs UART_lite, Ethernet Lite etc. in contrast to AC701 Full.

Hardware (AC701 full): Design contains MicroBlaze Processor, core peripherals AXI UART16550, AXI 1G/2.5G Ethernet, AXI I2C, AXI GPIO, AXI DDR controller, SPI flash, led_4bits.

Software: fs-boot, u-boot, Linux, device-tree, rootfs (minimal packages).
Pre-built Images: Ready to test images bitstream, fs-boot, u-boot, Linux and rootfs for booting u-boot and Linux.
MicroBlaze KC705 xilinx-kc705-v20XY.Z-final.bsp This BSP contains two BSPs [KC705 lite, KC705 full].

Hardware (KC705 lite): Design contains MicroBlaze Processor, core peripherals UART_lite, Ethernet Lite, AXI I2C, AXI GPIO, AXI DDR controller, Linear flash, led_8bits.
Hardware (KC705 full): Design contains MicroBlaze Processor, core peripherals AXI UART16550, AXI 1G/2.5G Ethernet, AXI I2C, AXI GPIO, AXI DDR controller, Linear flash, led_8bits.

Software: fs-boot, u-boot, Linux, device-tree, rootfs (minimal packages).
Pre-built Images: Ready to test images bitstream, fs-boot, u-boot, Linux and rootfs for booting u-boot and Linux.
MicroBlaze KCU105 xilinx-kcu105-v20XY.Z-final.bsp Hardware: Design contains MicroBlaze Processor, core peripherals AXI I2C, AXI GPIO, AXI DDR controller, AXI QSPI, led_8bits, and AXI Ethernet IP.
Software: fs-boot, U-boot, Linux, device-tree, rootfs (minimal packages).
Pre-built Images: Ready to test images bitstream, fs-boot, u-boot, Linux and rootfs for booting u-boot and Linux.
MicroBlaze SP701 xilinx-sp701-v20XY.Z-final.bsp Hardware: Design contains MicroBlaze Processor, core peripherals AXI I2C, AXI GPIO, AXI DDR controller, AXI QSPI, led_8bits, and AXI Ethernet IP.
Software: fs-boot, U-boot, Linux, device-tree, rootfs (minimal packages).
Pre-built Images: Ready to test images bitstream, fs-boot, u-boot, Linux and rootfs for booting u-boot and Linux.
MicroBlaze VCU118 xilinx-vcu118-v20XY.Z-final.bsp Hardware: Design contains MicroBlaze Processor, core peripherals AXI I2C, AXI GPIO, AXI DDR controller, AXI QSPI, led_8bits, and AXI Ethernet IP.
Software: fs-boot, U-boot, Linux, device-tree, rootfs (minimal packages).
Pre-built Images: Ready to test images bitstream, fs-boot, u-boot, Linux and rootfs for booting u-boot and Linux.
Zynq-7000 ZC702 xilinx-zc702-v20XY.Z-final.bsp Hardware: Design contains Zynq-7000 PS block (DDR, UART, SD, QSPI, Ethernet etc.) and AXI GPIO connected with led_4bits.
Software: FSBL, U-boot, Linux, device-tree (includes Open AMP), rootfs (minimal packages).
Pre-built Images: Ready to test images bitstream, FSBL, u-boot, Linux and rootfs for booting u-boot and Linux.
Zynq-7000 ZC706 xilinx-zc706-v20XY.Z-final.bsp Hardware: Design contains Zynq-7000 PS block (DDR, UART, SD, QSPI, Ethernet etc.) and AXI GPIO connected with led_4bits, dip_switches_4bits, gpio_sws_3bits.
Software: FSBL, U-boot, Linux, device-tree (includes Open AMP), rootfs (minimal packages).
Pre-built Images: Ready to test images bitstream, FSBL, u-boot, Linux and rootfs for booting u-boot and Linux.
Zynq-7000 Avnet Digilent Zedboard avnet-digilent-zedboard-v20XY.Z-final.bsp Hardware: Design contains Zynq-7000 PS block (DDR, UART, SD, QSPI, Ethernet etc.) and AXI GPIO connected with led_8bits, btns_5bits, sws_8bits.
Software: FSBL, U-boot, Linux, device-tree (includes Open AMP), rootfs (minimal packages).
Pre-built Images: Ready to test images bitstream, FSBL, u-boot, Linux and rootfs for booting u-boot and Linux.
Zynq UltraScale+ MPSoC ZCU102 production silicon xilinx-zcu102-v20XY.Z-final.bsp Hardware: Design contains Zynq UltraScale+ MPSoC PS block (DDR, UART, SD, QSPI, Ethernet, PCIe, DP, USB, SATA etc.)
Software: FSBL, PMUFW, ATF, U-boot, Linux, device-tree (includes Open AMP, Xen), rootfs (minimal packages).
Pre-built Images: Ready to test images bitstream, FSBL, PMUFW, ATF, u-boot, Linux and rootfs for booting u-boot and Linux.
Zynq UltraScale+ MPSoC ZCU104 production silicon xilinx-zcu104-v20XY.Z-final.bsp Hardware: Design contains Zynq UltraScale+ MPSoC PS block (DDR, UART, SD, QSPI, Ethernet, DP, USB, SATA etc.), VCU DDR4 Controller (PL DDR) and VCU IP.
Software: FSBL, PMUFW, ATF, U-boot, Linux, device-tree (includes Open AMP, Xen), vcu-control software, rootfs (minimal packages which includes additional SW packages like GStreamer, OpenMAX, V4L2, libdrm and vcu-examples).
Pre-built Images: Ready to test images bitstream, FSBL, PMUFW, ATF, u-boot, Linux and rootfs for booting u-boot and Linux.
Zynq UltraScale+ MPSoC ZCU106 production silicon xilinx-zcu106-v20XY.Z-final.bsp Hardware: Design contains Zynq UltraScale+ MPSoC PS block (DDR, UART, SD, QSPI, Ethernet, PCIe, DP, USB, SATA etc.), VCU DDR4 Controller (PL DDR) and VCU IP.
Software: FSBL, PMUFW, ATF, U-boot, Linux, device-tree (includes OpenAMP, Xen), vcu-control software, rootfs (minimal packages which includes additional SW packages like GStreamer, OpenMAX, V4L2, libdrm and vcu-examples).
Pre-built Images: Ready to test images bitstream, FSBL, PMUFW, ATF, u-boot, Linux and rootfs for booting u-boot and Linux.
Zynq UltraScale+ RFSoC ZCU111 production silicon xilinx-zcu111-v20XY.Z-final.bsp Hardware: Design contains Zynq UltraScale+ RFSoC PS block (DDR, UART, SD, QSPI, Ethernet, DP, USB, SATA etc) and rf_data_converters, sd_fec_dec, adc_sink, dac_source, axi_gpio, axi_intc IP’s.
Software: FSBL, PMUFW, ATF, U-boot, Linux, device-tree (includes Open AMP, Xen), rfdc-drivers, rootfs (minimal packages which includes RDFC example applications).
Pre-built Images: Ready to test images bitstream, FSBL, PMUFW, ATF, u-boot, Linux and rootfs for booting u-boot and Linux.
Zynq UltraScale+ RFSoC ZCU1275 xilinx-zcu1275-v20XY.Z-final.bsp Hardware: Design contains Zynq UltraScale+ RFSoC PS block (DDR, UART, SD, QSPI, Ethernet, DP, USB, SATA etc) and rf_data_converters, adc_sink, dac_source, axi_gpio, axi_intc IP’s.
Software: FSBL, PMUFW, ATF, U-boot, Linux, device-tree (includes Open AMP, Xen), rfdc-drivers, rootfs (minimal packages which includes RDFC example applications).
Pre-built Images: Ready to test images bitstream, FSBL, PMUFW, ATF, u-boot, Linux and rootfs for booting u-boot and Linux.
Zynq UltraScale+ RFSoC ZCU1285 xilinx-zcu1285-v20XY.Z-final.bsp Hardware: Design contains Zynq UltraScale+ RFSoC PS block (DDR, UART, SD, QSPI, Ethernet, DP, USB, SATA etc) and rf_data_converters, adc_sink, dac_source, axi_gpio, axi_intc IP’s.
Software: FSBL, PMUFW, ATF, U-boot, Linux, device-tree (includes Open AMP, Xen), rfdc-drivers, rootfs (minimal packages which includes RDFC example applications).
Pre-built Images: Ready to test images bitstream, FSBL, PMUFW, ATF, u-boot, Linux and rootfs for booting u-boot and Linux.

Note: The “ sstate-cache" (sstate\_\_2019.2.tar.gz) file can be found on the Xilinx download area along with an associated [README](https://www.xilinx.com/member/forms/download/xef.html?filename=sstate_rel_2019.2_README.tar.gz) file that outlines the procedure to use "sstate cache".

Refer to the attached file “2019.2_PetaLinux_Packages_List” for software package versions tested on host machines, which is required for PetaLinux installation tools.

README for downloads area.

PetaLinux 2019.2 contains the following build collateral:

Component Git repo Git Branches Git Tags Commit ID Comments
FSBL git://github.com/Xilinx/embeddedsw.git release-2019.2 xilinx-v2019.2 e8db5fb118229fdc621e0ec7848641a23bf60998 FSBL for Zynq-7000 is at embeddedsw/lib/sw_apps/zynq_fsbl
FSBL for Zynq UltraScale+ is at embeddedsw/lib/sw_apps/zynqmp_fsbl
PMU Firmware git://github.com/Xilinx/embeddedsw.git release-2019.2 xilinx-v2019.2 e8db5fb118229fdc621e0ec7848641a23bf60998 PMU for Zynq UltraScale+ Firmware is at embeddedsw/lib/sw-apps/zynqmp_pmufw
Device-tree git://github.com/Xilinx/device-tree-xlnx.git master xilinx-v2019.2 a8b39cf536e6ccda56affb27b2727c1e4d6edad2  
Linux git://github.com/Xilinx/linux-xlnx.git xlnx_rebase_v4.19 xilinx-v2019.2 b983d5fd71d4feaf494cdbe0593ecc29ed471cb8 Linux Kernel rebase version 4.19
U-Boot git://github.com/Xilinx/u-boot-xlnx.git master xilinx-v2019.2 dc61275b1d505f6a236de1c5b0f35485914d2bcc U-Boot Version v2019.01
QEMU git://github.com/Xilinx/qemu.git master xilinx-v2019.2 6617fbc8be3525ca524f7d4ef7fc7b14c5b0c822  
Xen git://github.com/Xilinx/xen.git xilinx/release-2019.2 xilinx-v2019.2 0bb0d1c1f59da1a0fbc8d3fea843434678bcd6d9 Xen Version 4.11
ARM-Trusted-Firmware (ATF) git://github.com/Xilinx/arm-trusted-firmware.git master xilinx-v2019.2 713dace94b259845fd8eede11061fbd8f039011e ATF is based on upstream version 2.0
Yocto git://github.com/Xilinx/meta-xilinx.git
git://github.com/Xilinx/meta-xilinx-tools.git
git://github.com/Xilinx/meta-petalinux.git		 rel-v2019.2 No Tags 586e4001cdd90e3db67692b14bbe5daabc565478
1f0161a321aac36b0dfe6d742f2019abd146d998
6f3c49f124d2ce1bfcea006091fd72063a63ed95		 Yocto 2.6.1 Thud
qemu-devicetrees git://github.com/Xilinx/qemu-devicetrees.git branch/xilinx-v2019.2 xilinx-v2019.2 d119986a6dd800bc3e71ea171b5b6741e0128289  
OpenAMP git://github.com/Xilinx/open-amp.git master xilinx-v2019.2 7fd76b240fb009d25b774c098e73908b2ddb7d92  
libmetal git://github.com/Xilinx/libmetal.git master xilinx-v2019.2 c7fe342fcabb638dc98f3356d7eea869f8363ec6  
VCU OpenMax IL git://github.com/Xilinx/vcu-omx-il.git master xilinx-v2019.2 9bbb40e3ceddd9e166d1d97aa4ac380459166344  
VCU Control Software git://github.com/Xilinx/vcu-ctrl-sw.git master xilinx-v2019.2 f3001b44eeaf770cbd9f95d2cfd0b02d3f65b2d3  
VCU Firmware git://github.com/Xilinx/vcu-firmware.git master xilinx-v2019.2 29ab982965b797b1c9b567faba47378578398f4a  
VCU Modules git://github.com/Xilinx/vcu-modules.git master xilinx-v2019.2 d4b46f2ee10e5d13609ca982d8d8bae662468837  
GStreamer OpenMax IL git://github.com/Xilinx/gst-omx.git xilinx-master xilinx-v2019.2 f511f62c737318dc329a6417dca5d38065d70a77 GStreamer version 1.14.4
GStreamer Plugins-Base git://github.com/Xilinx/gst-plugins-base.git master-rel-1.12.2 xilinx-v2019.2 0deb29a2e32b92cfd92d61136576d9fa310528c1  
GStreamer Plugins-Bad git://github.com/Xilinx/gst-plugins-bad.git master-rel-1.12.2 xilinx-v2019.2 33016ba0374828b3188f9c9b236b185a5496cfe7  
GStreamer Plugins-Good git://github.com/Xilinx/gst-plugins-good.git master-rel-1.12.2 xilinx-v2019.2 29b75b92985f58770c9580b58582404eadbb256a  
GStreamer git://github.com/Xilinx/gstreamer.git rel-v2019.2 No Tags c3c502011e3585749c664e6d2125c49419bb9889  
hdmi-modules git://github.com/Xilinx/hdmi-modules.git master xilinx-v2019.2 be354cc3c8889932aabede8cddda0770d77e7843  
GCC         MB compiler version 8.2
ARM 8.2

2019.2 Release Notes for Open Source components wiki page:

Covers details for below components changes (new features/fixes) in a particular release.

https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/182190690/2019.2+Release+Notes+for+Open+Source+Components

2019.2 Release pre-built images wiki page:

https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/183304302/Zynq+2019.2+Release

2019.2 New Features:

PetaLinux

  • PetaLinux supports Yocto devtool

GPU MALI-400

  • Added r9p0 DDK which has some bug fixes and supports GBM 1.17

  • Support for rendering graphics on different surfaces using EGL config variable for Qt GBM or KMS backend.

2019.2 Bug Fixes:

PetaLinux

  • Fixed Makefile indentation in (UG1144) docs which caused build errors when adding custom libraries.

  • Fixed Migration section in (UG1144) docs for changes to config, .bb and .bbapend files.

  • Fixed PetaLinux C++ template apps which fails to build when using LDFLAGS compiler options in recipes.

  • Fixed PetaLinux project zynqMP template flow u-boot configs and #defines generated from tool.

  • Fixed PetaLinux build errors when fpga-manager option is enabled with HDF that does not contain bitstream.

  • Fixed petalinux-boot with –before-connect and –after-connect options.

  • Fixed PetaLinux BSP README content.
  • Fixed booting Zynq-7000 kernel, dtb and rootfs images separately using bootm commands.

GPU MALI-400

  • Fixed ARM libmali is made compatible with wayland 1.15
  • Wayland-egl implementation will now come from wayland (>=1.14)
  • Bug fix in gbm implementation (API: gbm_bo_import)

Known Issues for 2019.2:

Linux/Baremetal Components Description Work-around To be fixed version
Linux PetaLinux Zynq UltraScale+ MPSoC: How to enable UHS (SD 3.0) support for ZCU102 and ZCU106 evaluation board PetaLinux BSPs (Xilinx Answer 69978)  
Linux XSDK Zynq UltraScale+ MPSoC: Connecting XSDB to Linux CPU idle (Xilinx Answer 69143)  
Linux FSBL Zynq UltraScale+ MPSoC: How to achieve SATA performance in Linux (Xilinx Answer 71584)  
Linux FSBL Zynq UltraScale+ MPSoC: How to make SMMU work with SATA IP (Xilinx Answer 71790)  
Linux Yocto, PetaLinux 2019.x Zynq UltraScale+ MPSoC: Yocto or PetaLinux throws warnings when you enable libmali with fbdev windowing system (Xilinx Answer 72139)  
Linux Yocto, PetaLinux 2019.x Zynq UltraScale+ MPSoC: Linux boot throws fatal errors with libmali and X11 enabled in PetaLinux or Yocto images (Xilinx Answer 72363)  
Linux Kernel 2019.x Zynq7000, Zynq UltraScale+ MPSoC: Yocto or PetaLinux build with petalinux-image-full images hangs without reaching Linux boot login prompt (Xilinx Answer 72377)  
Baremetal BSP 2019.2 Zynq UltraScale+ MPSoC/RFSoC: RPU suspend-resume multiple times does not work (Xilinx Answer 73015) 2020.1
Linux VCU 2019.2 Zynq UltraScale+ MPSoC VCU - Why do I see a hang while transcoding a Dynamically Changing Resolution stream containing a 4K resolution from AVC or HEVC to AVC using a GStreamer pipeline? (Xilinx Answer 73020) 2020.1
Linux VCU 2019.2 Zynq UltraScale+ MPSoC VCU - Why do I see a hang while running two 4kp30 AVC encoding and decoding GStreamer pipelines and running for more than 12 hours? (Xilinx Answer 73021)  
Linux VCU 2019.2 Zynq UltraScale+ MPSoC VCU - Why do I see errors when trying to encode 10-bit 4:2:2 4K DCI to HEVC format? (Xilinx Answer 73022)  
Linux VCU 2019.2 Zynq UltraScale+ MPSoC VCU - Why do I see “VCU: unavailable resource error” errors when trying switching from a 4Kp30 stream to a 4Kp60 stream, when using the Low Latency Phase 2 (LLP2) mode? (Xilinx Answer 73023)  
Linux VCU 2019.2 Zynq UltraScale+ MPSoC VCU - Why do I see the VCU hang when encoding 4Kp60 AVC num-slices=16, when using the Low Latency Phase 2 (LLP2) mode? (Xilinx Answer 73024)  
Linux VCU 2019.2 Zynq UltraScale+ MPSoC VCU - Why are the QP values in the last row, not properly updated when using the Example GStreamer Application? (Xilinx Answer 73049) 2020.1
Linux VCU 2019.2 Zynq UltraScale+ MPSoC VCU - Why do I see the high decoder latency number while decoding a reduced latency HEVC encoded stream? (Xilinx Answer 73051) 2020.1
Linux Device-tree 2019.2 Zynq UltraScale+ MPSoC: PetaLinux ZCU106 BSP fails to detect SD Card FAT32 or EXT4 partition when booting Linux (Xilinx Answer 73079) 2020.1

README_content_v2019.2

=============================

Contents in the download area

In the download area along with the PetaLinux tool installer and BSPs for various HW. The following content is also available for download:

  1. PetaLinux 2019.2 License and copyrights info (TAR/GZIP) file:

    This file contains the copyright headers of all the SW components shipped as part of the PetaLinux tool. It also contains the copyright headers for all the SW packages, available at https://petalinux.xilinx.com/ that petaLinux tool packages in the project, when selected. This file is provide as part of legal requirement for your viewing only. It is not required to be downloaded for using the PetaLinux tool or BSPs.

​

  1. PetaLinux 2019.2 Open Components Source Code (TAR/GZIP) file:

This file contains the source code of all the SW components shipped as  part of the PetaLinux tool. It also contains the source code for all the  SW packages, available at https://petalinux.xilinx.com/ that petaLinux tool packages  in the project, when selected. This file is provide as part of legal requirement  for your viewing only. It is not required to be downloaded for using  the PetaLinux tool or BSPs.

Sample list of components in the files 1) and 2):

	QEMU

	busybox

	mtd-utils

	libfdt

	dtc

	u-boot

	device-tree-generator

	iso-codes

	ca-certificates

	db

	bash

	Linux

	ATF

	XEN

	kconfig-frontends

	Note: more than 1000 other SW components.

2019.2_PetaLinux_Package_List

Linux Distribution OS details:

  1. RHEL 7.4, 7.5 and 7.6 Server: Infrastructure Server
  2. RHEL 7.4, 7.5 and 7.6 Desktop : Development and Creative workstation.
  3. CentOS 7.4, 7.5 and 7.6 Server (From Everything.ISO): Infrastructure server.
  4. CentOS 7.4, 7.5 and 7.6 Desktop (From Everything.ISO): Development and Creative workstation.
  5. Ubuntu 16.04.05 and Ubuntu 16.04.06 Desktop.
  6. Ubuntu 16.04.05 and Ubuntu 16.04.06 Server.
  7. Ubuntu 18.04.01 and Ubuntu 18.04.02 Desktop.
  8. Ubuntu 18.04.02 and Ubuntu 18.04.02 Server.

Note:

  1. Empty packages are not installed means assuming these are default from Linux Distribution.

Tool/Library Versions

RHEL/CentOS versions

Tool/Library Red Hat Enterprise Desktop/Server 7.4 (64-bit) Red Hat Enterprise Destop/Server 7.5(64-bit) Red Hat Enterprise Desktop/Server 7.6 (64-bit) CentOS Desktop/Server7.4 (64-bit) CentOS Desktop/Server 7.5 (64-bit) CentOS Desktop/Server 7.6 (64-bit)
Quick Installation steps for packages: su yum install net-tools gawk make wget tar bzip2.x86_64 gzip python unzip perl patch.x86_64 diffutils diffstat git cpp gcc gcc-c++ glibc-devel texinfo chrpath socat perl-Data-Dumper perl-Text-ParseWords perl-Thread-Queue python34-pip xz which SDL-devel xterm autoconf libtool.x86_64 zlib-devel automake glib2-devel zlib ncurses-devel openssl-devel dos2unix flex bison glibc.i686 screen pax glibc-devel.i686 compat-libstdc++-33.i686 libstdc++.i686          
kernel Version 3.10.0-693.17.1.el7.x86_64 3.10.0-693.17.1.el7.x86_64 3.10.0-693.17.1.el7.x86_64 3.10.0-693.17.1.el7.x86_64 3.10.0-862.el7.x86_64 3.10.0-957.el7.x86_64
dos2unix dos2unix-6.0.3-7.el7.x86_64 dos2unix-6.0.3-7.el7.x86_64 dos2unix-6.0.3-7.el7.x86_64 dos2unix-6.0.3-7.el7.x86_64 dos2unix-6.0.3-7.el7.x86_64 dos2unix-6.0.3-7.el7.x86_64
ip (iproute) iproute-3.10.0-87.el7.x86_64 iproute-3.10.0-87.el7.x86_64 iproute-3.10.0-87.el7.x86_64 iproute-3.10.0-87.el7.x86_64 iproute-4.11.0-14.el7.x86_64 iproute-4.11.0-14.el7.x86_64
gawk gawk-4.0.2-4.el7_3.1.x86_64 gawk-4.0.2-4.el7_3.1.x86_64 gawk-4.0.2-4.el7_3.1.x86_64 gawk-4.0.2-4.el7_3.1.x86_64 gawk-4.0.2-4.el7_3.1.x86_64 gawk-4.0.2-4.el7_3.1.x86_64
gcc gcc-4.8.5-16.el7_4.1.x86_64 gcc-4.8.5-16.el7_4.1.x86_64 gcc-4.8.5-16.el7_4.1.x86_64 gcc-4.8.5-16.el7_4.1.x86_64 gcc-4.8.5-39.el7.x86_64 gcc-4.8.5-39.el7.x86_64
git git-1.8.3.1-12.el7_4.x86_64 git-1.8.3.1-12.el7_4.x86_64 git-1.8.3.1-12.el7_4.x86_64 git-1.8.3.1-12.el7_4.x86_64 git-1.8.3.1-12.el7_4.x86_64 git-1.8.3.1-12.el7_4.x86_64
make make-3.82-23.el7.x86_64 make-3.82-23.el7.x86_64 make-3.82-23.el7.x86_64 make-3.82-23.el7.x86_64 make-3.82-23.el7.x86_64 make-3.82-23.el7.x86_64
netstat (net-tools) net-tools-2.0-0.24.20131004git.el7.x86_64 net-tools-2.0-0.24.20131004git.el7.x86_64 net-tools-2.0-0.24.20131004git.el7.x86_64 net-tools-2.0-0.24.20131004git.el7.x86_64 net-tools-2.0-0.24.20131004git.el7.x86_64 net-tools-2.0-0.24.20131004git.el7.x86_64
ncurses-devel(libncurses5-dev) ncurses-devel-5.9-14.20130511.el7_4.x86_64 ncurses-devel-5.9-14.20130511.el7_4.x86_64 ncurses-devel-5.9-14.20130511.el7_4.x86_64 ncurses-devel-5.9-14.20130511.el7_4.x86_64 ncurses-devel-5.9-14.20130511.el7_4.x86_64 ncurses-devel-5.9-14.20130511.el7_4.x86_64
tftp-server tftp-server tftp-server tftp-server tftp-server tftp-server tftp-server
zlib-devel(also,install 32-bit of this version) zlib-devel-1.2.7-18.el7.x86_64 zlib-devel-1.2.7-18.el7.x86_64 zlib-devel-1.2.7-18.el7.x86_64 zlib-devel-1.2.7-18.el7.x86_64 zlib-devel-1.2.7-18.el7.x86_64 zlib-devel-1.2.7-18.el7.x86_64
             
openssl-devel openssl-devel-1.0.2k-19.el7.x86_64 openssl-devel-1.0.2k-19.el7.x86_64 openssl-devel-1.0.2k-19.el7.x86_64 openssl-devel-1.0.2k-19.el7.x86_64 openssl-devel-1.0.2k-19.el7.x86_64 openssl-devel-1.0.2k-19.el7.x86_64
flex flex-2.5.37-3.el7.x86_64 flex-2.5.37-3.el7.x86_64 flex-2.5.37-3.el7.x86_64 flex-2.5.37-3.el7.x86_64 flex-2.5.37-6.el7.x86_64 flex-2.5.37-6.el7.x86_64
bison bison-3.0.4-1.el7.x86_64 bison-3.0.4-1.el7.x86_64 bison-3.0.4-1.el7.x86_64 bison-3.0.4-1.el7.x86_64 bison-3.0.4-2.el7.x86_64 bison-3.0.4-2.el7.x86_64
libselinux libselinux-2.5-14.1.el7.x86_64 libselinux-2.5-14.1.el7.x86_64 libselinux-2.5-14.1.el7.x86_64 libselinux-2.5-14.1.el7.x86_64 libselinux-2.5-14.1.el7.x86_64 libselinux-2.5-14.1.el7.x86_64
gnupg gnupg2-2.0.22-4.el7.x86_64 gnupg2-2.0.22-4.el7.x86_64 gnupg2-2.0.22-4.el7.x86_64 gnupg2-2.0.22-4.el7.x86_64 gnupg2-2.0.22-4.el7.x86_64 gnupg2-2.0.22-4.el7.x86_64
wget wget-1.14-15.el7_4.1.x86_64 wget-1.14-15.el7_4.1.x86_64 wget-1.14-15.el7_4.1.x86_64 wget-1.14-15.el7_4.1.x86_64 wget-1.14-15.el7_4.1.x86_64 wget-1.14-18.el7.x86_64
diffstat diffstat-1.57-4.el7.x86_64 diffstat-1.57-4.el7.x86_64 diffstat-1.57-4.el7.x86_64 diffstat-1.57-4.el7.x86_64 diffstat-1.57-4.el7.x86_64 diffstat-1.57-4.el7.x86_64
chrpath chrpath-0.16-0.el7.x86_64 chrpath-0.16-0.el7.x86_64 chrpath-0.16-0.el7.x86_64 chrpath-0.16-0.el7.x86_64 chrpath-0.16-0.el7.x86_64 chrpath-0.16-0.el7.x86_64
socat socat-1.7.3.2-2.el7.x86_64 socat-1.7.3.2-2.el7.x86_64 socat-1.7.3.2-2.el7.x86_64 socat-1.7.3.2-2.el7.x86_64 socat-1.7.3.2-2.el7.x86_64 socat-1.7.3.2-2.el7.x86_64
xterm xterm-295-3.el7.x86_64 xterm-295-3.el7.x86_64 xterm-295-3.el7.x86_64 xterm-295-3.el7.x86_64 xterm-295-3.el7.x86_64 xterm-295-3.el7.x86_64
autoconf autoconf-2.69-11.el7.noarch autoconf-2.69-11.el7.noarch autoconf-2.69-11.el7.noarch autoconf-2.69-11.el7.noarch autoconf-2.69-11.el7.noarch autoconf-2.69-11.el7.noarch
libtool libtool-2.4.2-22.el7_3.x86_64 libtool-2.4.2-22.el7_3.x86_64 libtool-2.4.2-22.el7_3.x86_64 libtool-2.4.2-22.el7_3.x86_64 libtool-2.4.2-22.el7_3.x86_64 libtool-2.4.2-22.el7_3.x86_64
tar tar-1.26-32.el7.x86_64 tar-1.26-32.el7.x86_64 tar-1.26-32.el7.x86_64 tar-1.26-32.el7.x86_64 tar-1.26-34.el7.x86_64 tar-1.26-35.el7.x86_64
unzip unzip-6.0-16.el7.x86_64 unzip-6.0-16.el7.x86_64 unzip-6.0-16.el7.x86_64 unzip-6.0-16.el7.x86_64 unzip-6.0-19.el7.x86_64 unzip-6.0-19.el7.x86_64
texinfo texinfo-5.1-5.el7.x86_64 texinfo-5.1-5.el7.x86_64 texinfo-5.1-5.el7.x86_64 texinfo-5.1-5.el7.x86_64 texinfo-5.1-5.el7.x86_64 texinfo-5.1-5.el7.x86_64
zlib1g-dev            
gcc-multilib            
build-essential            
SDL-devel SDL-devel-1.2.15-14.el7.x86_64 SDL-devel-1.2.15-14.el7.x86_64 SDL-devel-1.2.15-14.el7.x86_64 SDL-devel-1.2.15-14.el7.x86_64 SDL-devel-1.2.15-14.el7.x86_64 SDL-devel-1.2.15-14.el7.x86_64
glibc-devel glibc-devel-2.17-292.el7.x86_64 glibc-devel-2.17-292.el7.x86_64 glibc-devel-2.17-292.el7.x86_64 glibc-devel-2.17-292.el7.x86_64 glibc-devel-2.17-292.el7.x86_64 glibc-devel-2.17-292.el7.x86_64
             
glib2-devel glib2-devel-2.56.1-5.el7.x86_64 glib2-devel-2.56.1-5.el7.x86_64 glib2-devel-2.56.1-5.el7.x86_64 glib2-devel-2.56.1-5.el7.x86_64 glib2-devel-2.56.1-5.el7.x86_64 glib2-devel-2.56.1-5.el7.x86_64
automake automake-1.13.4-3.el7.noarch automake-1.13.4-3.el7.noarch automake-1.13.4-3.el7.noarch automake-1.13.4-3.el7.noarch automake-1.13.4-3.el7.noarch automake-1.13.4-3.el7.noarch
screen gnome-screenshot-3.22.0-1.el7.x86_64 gnome-screenshot-3.22.0-1.el7.x86_64 gnome-screenshot-3.22.0-1.el7.x86_64 gnome-screenshot-3.22.0-1.el7.x86_64 gnome-screenshot-3.22.0-1.el7.x86_64 gnome-screenshot-3.22.0-1.el7.x86_64
pax pax-3.4-19.el7.x86_64 pax-3.4-19.el7.x86_64 pax-3.4-19.el7.x86_64 pax-3.4-19.el7.x86_64 pax-3.4-19.el7.x86_64 pax-3.4-19.el7.x86_64
gzip gzip-1.5-9.el7.x86_64 gzip-1.5-9.el7.x86_64 gzip-1.5-9.el7.x86_64 gzip-1.5-9.el7.x86_64 gzip-1.5-10.el7.x86_64 gzip-1.5-9.el7.x86_64
libstdc++ libstdc++-4.8.5-16.el7_4.1.x86_64 libstdc++-4.8.5-16.el7_4.1.x86_64 libstdc++-4.8.5-16.el7_4.1.x86_64 libstdc++-4.8.5-16.el7_4.1.x86_64 libstdc++-4.8.5-39.el7.x86_64 libstdc++-4.8.5-39.el7.x86_64
g++ (gcc-c++) gcc-c++-4.8.5-16.el7_4.1.x86_64 gcc-c++-4.8.5-16.el7_4.1.x86_64 gcc-c++-4.8.5-16.el7_4.1.x86_64 gcc-c++-4.8.5-16.el7_4.1.x86_64 gcc-c++-4.8.5-16.el7_4.1.x86_64 gcc-c++-4.8.5-39.el7.x86_64
patch patch-2.7.1-8.el7.x86_64 patch-2.7.1-8.el7.x86_64 patch-2.7.1-8.el7.x86_64 patch-2.7.1-8.el7.x86_64 patch-2.7.1-11.el7.x86_64 patch-2.7.1-11.el7.x86_64
zlib zlib-1.2.7-18.el7.x86_64 zlib-1.2.7-18.el7.x86_64 zlib-1.2.7-18.el7.x86_64 zlib-1.2.7-18.el7.x86_64 zlib-1.2.7-18.el7.x86_64 zlib-1.2.7-18.el7.x86_64
python2 Python 2.7.5 Python 2.7.5 Python 2.7.5 Python 2.7.5 Python 2.7.5 Python 2.7.5
tftpd            
libssl-dev            
diffutils diffutils-3.3-4.el7.x86_64 diffutils-3.3-4.el7.x86_64 diffutils-3.3-4.el7.x86_64 diffutils-3.3-4.el7.x86_64 diffutils-3.3-4.el7.x86_64 diffutils-3.3-4.el7.x86_64
bzip2.x86-64 bzip2-1.0.6-13.el7.x86-64 bzip2-1.0.6-13.el7.x86-64 bzip2-1.0.6-13.el7.x86-64 bzip2-1.0.6-13.el7.x86-64 bzip2-1.0.6-13.el7.x86-64 bzip2-1.0.6-13.el7.x86-64
perl perl-5.16.3-292.el7.x86_64 perl-5.16.3-292.el7.x86_64 perl-5.16.3-292.el7.x86_64 perl-5.16.3-292.el7.x86_64 perl-5.16.3-292.el7.x86_64 perl-5.16.3-292.el7.x86_64
cpp cpp-4.8.5-16.el7.x86_64 cpp-4.8.5-28.el7.x86_64 cpp-4.8.5-39.el7.x86_64 cpp-4.8.5-16.el7.x86_64 cpp-4.8.5-28.el7.x86_64 cpp-4.8.5-39.el7.x86_64
glibc-devel glibc-devel-2.17.292.el7.x86-64 glibc-devel-2.17.292.el7.x86-64 glibc-devel-2.17.292.el7.x86-64 glibc-devel-2.17.292.el7.x86-64 glibc-devel-2.17.292.el7.x86-64 glibc-devel-2.17.292.el7.x86-64
perl-dat-dumper perl-dat-dumper-2.145-3.el7.x86_64 perl-dat-dumper-2.145-3.el7.x86_64 perl-dat-dumper-2.145-3.el7.x86_64 perl-dat-dumper-2.145-3.el7.x86_64 perl-dat-dumper-2.145-3.el7.x86_64 perl-dat-dumper-2.145-3.el7.x86_64
perl-thread-queue perl-thread-queue-3.02-2.el7.noarch perl-thread-queue-3.02-2.el7.noarch perl-thread-queue-3.02-2.el7.noarch perl-thread-queue-3.02-2.el7.noarch perl-thread-queue-3.02-2.el7.noarch perl-thread-queue-3.02-2.el7.noarch
xz xz-5.2.2-1.el7.x86_64 xz-5.2.2-1.el7.x86_64 xz-5.2.2-1.el7.x86_64 xz-5.2.2-1.el7.x86_64 xz-5.2.2-1.el7.x86_64 xz-5.2.2-1.el7.x86_64
perl-Text-ParseWords   perl-Text-ParseWords-3.29-4.el7.noarch perl-Text-ParseWords-3.29-4.el7.noarch   perl-Text-ParseWords-3.29-4.el7.noarch perl-Text-ParseWords-3.29-4.el7.noarch
python34-pip python34-pip-8.1.2-10.el7.noarch python34-pip-8.1.2-10.el7.noarch python34-pip-8.1.2-10.el7.noarch python34-pip-8.1.2-10.el7.noarch python34-pip-8.1.2-10.el7.noarch python34-pip-8.1.2-10.el7.noarch

Ubuntu

Tool/Library Ubuntu Desktop /Server 16.04.05(64-bit) Ubuntu Desktop /Server 16.04.06 (64-bit) Ubuntu Desktop /Server 18.04.01 (64-bit) Ubuntu Desktop /Server 18.04.02 (64-bit)
Quick Installation steps for packages: sudo apt-get install gawk python build-essential gcc git make net-tools libncurses5-dev tftpd zlib1g-dev libssl-dev flex bison libselinux1 gnupg wget diffstat chrpath socat xterm autoconf libtool tar unzip texinfo zlib1g-dev gcc-multilib build-essential-dev zlib1g:i386 screen pax gzip      
kernel Version 4.15.0-45-generic 4.15.0-45-generic 4.15.0-29-generic 5.0.0-31-generic
dos2unix dos2unix-6.0.4-1 500 dos2unix-6.0.4-1 500 dos2unix-7.3.4-3 dos2unix-7.3.4-3
ip (iproute)        
gawk gawk-1:4.1.3+dfsg-0.1 gawk-1:4.1.3+dfsg-0.1 gawk-1:4.1.4+dfsg-1build1 gawk-1:4.1.4+dfsg-1build1
gcc gcc-4:5.3.1-1ubuntu1 500 gcc-4:5.3.1-1ubuntu1 500 gcc-4:7.4.0-1ubuntu2.3 gcc-4:7.4.0-1ubuntu2.3
git git-1:2.7.4-0ubuntu1.6 500 git-1:2.7.4-0ubuntu1.6 500 git-1:2.17.1-1ubuntu0.4 git-1:2.17.1-1ubuntu0.4
make make-4.1-6 500 make-4.1-6 500 make-4.1-9.1ubuntu1 make-4.1-9.1ubuntu1
netstat (net-tools) net-tools-1.60-26ubuntu1 500 net-tools-1.60-26ubuntu1 500 net-tools-1.60+git20161116.90da8a0-1ubuntu1 net-tools-1.60+git20161116.90da8a0-1ubuntu1
ncurses-devel(libncurses5-dev) ncurses-devel-6.0+20160213-1ubuntu1 ncurses-devel-6.0+20160213-1ubuntu1 ncurses-devel-6.1-1ubuntu1.18.04 ncurses-devel-6.1-1ubuntu1.18.04
tftp-server        
zlib-devel(also,install 32-bit of this version)        
         
openssl-devel openssl-devel-1.0.2g-1ubuntu4.15 openssl-devel-1.0.2g-1ubuntu4.15 openssl-devel-1.1.1-ubuntu2.1~18.04.4 openssl-devel-1.1.1-ubuntu2.1~18.04.4
flex flex-2.6.0-11 flex-2.6.0-11 flex-2.6.4-6 flex-2.6.4-6
bison bison-2:3.0.4.dfsg-1 bison-2:3.0.4.dfsg-1 bison-2:3.0.4.dfsg-1build1 bison-2:3.0.4.dfsg-1build1
libselinux        
gnupg gnupg-1.4.20-1ubuntu3.3 gnupg-1.4.20-1ubuntu3.3 gnupg-2.2.4-1ubuntu1.2 gnupg-2.2.4-1ubuntu1.2
wget wget-1.17.1-1ubuntu1.5 wget-1.17.1-1ubuntu1.5 wget-1.19.4-1ubuntu2.2 wget-1.19.4-1ubuntu2.2
diffstat diffstat-1.61-1 diffstat-1.61-1 diffstat-1.61-1build1 diffstat-1.61-1build1
chrpath chrpath-0.16-1 chrpath-0.16-1 chrpath-0.16-2 chrpath-0.16-2
socat socat-1.7.3.1-1 socat-1.7.3.1-1 socat-1.7.3.2-2ubuntu2 socat-1.7.3.2-2ubuntu2
xterm xterm-322-1ubuntu1 xterm-322-1ubuntu1 xterm-330-1ubuntu2 xterm-330-1ubuntu2
autoconf autoconf-2.69-9 autoconf-2.69-9 autoconf-2.69-11 autoconf-2.69-11
libtool libtool-2.4.6-0.1 libtool-2.4.6-0.1 libtool-2.4.6-2 libtool-2.4.6-2
tar tar-1.28-2.1 tar-1.28-2.1 tar-1.29b-2ubuntu0.1 tar-1.29b-2ubuntu0.1
unzip unzip-6.0-20ubuntu1 unzip-6.0-20ubuntu1 unzip-6.0-21ubuntu1 unzip-6.0-21ubuntu1
texinfo texinfo-6.1.0.dfsg.1-5 texinfo-6.1.0.dfsg.1-5 texinfo-6.5.0.dfsg.1-2 texinfo-6.5.0.dfsg.1-2
zlib1g-dev zlib1g-dev1:1.2.8.dfsg-2ubuntu4.1 zlib1g-dev1:1.2.8.dfsg-2ubuntu4.1 zlib1g-dev1:1.2.11.dfsg-0ubuntu2 zlib1g-dev1:1.2.11.dfsg-0ubuntu2
gcc-multilib gcc-multilib-4:5.3.1-1ubuntu1 gcc-multilib-4:5.3.1-1ubuntu1 gcc-multilib-4:7.4.0-1ubuntu2.3 gcc-multilib-4:7.4.0-1ubuntu2.3
build-essential build-essential-12.1ubuntu2 build-essential-12.1ubuntu2 build-essential-12.4ubuntu1 build-essential-12.4ubuntu1
SDL-devel        
glibc-devel        
         
glib2-devel        
automake automake-1:1.15-4ubuntu1 automake-1:1.15-4ubuntu1 automake-1:1.15.1-3ubuntu2 automake-1:1.15.1-3ubuntu2
screen gnome-screenshot-4.3.1-2build1 gnome-screenshot-4.3.1-2build1 gnome-screenshot-4.6.2-1ubuntu1 gnome-screenshot-4.6.2-1ubuntu1
pax pax-1:20151013-1 pax-1:20151013-1 pax-1:20171021-2 pax-1:20171021-2
gzip gzip-1.6-4ubuntu1 gzip-1.6-4ubuntu1 gzip-1.6-5ubuntu1 gzip-1.6-5ubuntu1
libstdc++ libstdc++-5.4.0-6ubuntu1~16.04.9cross1 libstdc++-5.4.0-6ubuntu1~16.04.9cross1 libstdc++-6.5.0-2ubuntu1~18.04 libstdc++-8.3.0-6ubuntu1~18.04.1
g++ (gcc-c++) gcc-c++-4:5.3.1-1ubuntu1 gcc-c++-4:5.3.1-1ubuntu1 gcc-c++-4:7.4.0-1ubuntu2.3 gcc-c++-7.4.0-1ubuntu1~18.04.1
patch patch-2.7.5-1ubuntu0.16.04.1 patch-2.7.5-1ubuntu0.16.04.1 patch-2.7.6-2ubuntu1 patch-2.7.6-2ubuntu1
zlib        
python2 Python 2.7.12 Python 2.7.12 Python 2.7.15~rc1-1 Python 2.7.15
tftpd tftpd-0.17-18ubuntu2 tftpd-0.17-18ubuntu2 tftpd-0.17-18ubuntu3 tftpd-0.17-18ubuntu3
libssl-dev libssl-dev-1.0.2g-1ubuntu4.15 libssl-dev-1.0.2g-1ubuntu4.15 libssl-dev-1.1.1-1ubuntu2.1~18.04.4 libssl-dev-1.1.1-1ubuntu2.1~18.04.4
diffutils diffutils-1:3.3-3 diffutils-1:3.3-3 diffutils-1:3.6-1 diffutils-1:3.6-1
bzip2.x86-64 bzip2-1.0.6-13.el7.x86-64 bzip2-1.0.6-8ubuntu0.2 bzip2-1.0.6-8ubuntu0.2 bzip2-1.0.6-8ubuntu0.2
perl perl-5.16.3-292.el7.x86_64 perl-5.22.1-9ubuntu0.6 perl-5.22.1-9ubuntu0.6 perl-5.22.1-9ubuntu0.6
cpp cpp-4:5.3.1-1ubuntu1 cpp-4:5.3.1-1ubuntu1 cpp-4:5.3.1-1ubuntu1 cpp-4:5.3.1-1ubuntu1
glibc-devel        
perl-dat-dumper        
perl-thread-queue        
xz        
perl-Text-ParseWords        
python34-pip pip-19.3.1 pip-19.3.1 pip-9.0.1 python34-pip-19.3.1