73686 - PetaLinux 2020.1 - Product Update Release Notes and Known Issues

Title

73686 - PetaLinux 2020.1 - Product Update Release Notes and Known Issues

Description

This Answer Record acts as the release notes for PetaLinux 2020.1 and contains links to information about resolved issues and updated collateral contained in this release.

Solution

BSPs supported for the 2020.1 PetaLinux Release

This table contains supported BSPs for Zynq-7000, MicroBlaze, and Zynq UltraScale+ MPSoC available on the Embedded Development download page.

Note: XY - Represents release year, Y - Represents release version.

Platform Variant BSP Name BSP Description
MicroBlaze AC701 xilinx-ac701-v20XY.Z-final.bsp This BSP contains two BSPs [AC701 lite, AC701 full].
Hardware (AC701 lite): Design contains MicroBlaze Processor, core peripherals UART_lite, Ethernet Lite, AXI I2C, AXI GPIO, AXI DDR controller, SPI flash, led_4bits. AC701 lite contains the AXI Lite IPs UART_lite, Ethernet Lite etc. in contrast to AC701 Full.
Hardware (AC701 full): Design contains MicroBlaze Processor, core peripherals AXI UART16550, AXI 1G/2.5G Ethernet, AXI I2C, AXI GPIO, AXI DDR controller, SPI flash, led_4bits.
Software: fs-boot, u-boot, Linux, device-tree, rootfs (minimal packages).
Pre-built Images: Ready to test images bitstream, fs-boot, u-boot, Linux and rootfs for booting u-boot and Linux.
MicroBlaze KC705 xilinx-kc705-v20XY.Z-final.bsp This BSP contains two BSPs [KC705 lite, KC705 full].
Hardware (KC705 lite): Design contains MicroBlaze Processor, core peripherals UART_lite, Ethernet Lite, AXI I2C, AXI GPIO, AXI DDR controller, Linear flash, led_8bits.
Hardware (KC705 full): Design contains MicroBlaze Processor, core peripherals AXI UART16550, AXI 1G/2.5G Ethernet, AXI I2C, AXI GPIO, AXI DDR controller, Linear flash, led_8bits.
Software: fs-boot, u-boot, Linux, device-tree, rootfs (minimal packages).
Pre-built Images: Ready to test images bitstream, fs-boot, u-boot, Linux and rootfs.
MicroBlaze KCU105 xilinx-kcu105-v20XY.Z-final.bsp Hardware: Design contains MicroBlaze Processor, core peripherals AXI I2C, AXI GPIO, AXI DDR controller, AXI QSPI, led_8bits, and AXI Ethernet IP.
Software: fs-boot, U-boot, Linux, device-tree, rootfs (minimal packages).
Pre-built Images: Ready to test bitstream, fs-boot, u-boot, Linux and rootfs.
MicroBlaze SP701 xilinx-sp701-v20XY.Z-final.bsp Hardware: Design contains MicroBlaze Processor, core peripherals AXI I2C, AXI GPIO, AXI DDR controller, AXI QSPI, led_8bits, and AXI Ethernet IP.
Software: fs-boot, U-boot, Linux, device-tree, rootfs (minimal packages).
Pre-built Images: Ready to test images bitstream, fs-boot, u-boot, Linux and rootfs.
MicroBlaze VCU118 xilinx-vcu118-v20XY.Z-final.bsp Hardware: Design contains MicroBlaze Processor, core peripherals AXI I2C, AXI GPIO, AXI DDR controller, AXI QSPI, led_8bits, and AXI Ethernet IP.
Software: fs-boot, U-boot, Linux, device-tree, rootfs (minimal packages).
Pre-built Images: Ready to test images bitstream, fs-boot, u-boot, Linux and rootfs.
Zynq-7000 ZC702 xilinx-zc702-v20XY.Z-final.bsp Hardware: Zynq-7000 PS block (DDR, UART, SD, QSPI, Ethernet etc.) and AXI GPIO with led_4bits.
Software: FSBL, U-boot, Linux, device-tree (includes Open AMP), rootfs (minimal packages).
Pre-built Images: Ready to test images bitstream, FSBL, u-boot, Linux and rootfs.
Zynq-7000 ZC706 xilinx-zc706-v20XY.Z-final.bsp Hardware: Zynq-7000 PS block (DDR, UART, SD, QSPI, Ethernet etc.) and AXI GPIO connected with led_4bits, dip_switches_4bits, gpio_sws_3bits.
Software: FSBL, U-boot, Linux, device-tree (includes Open AMP), rootfs (minimal packages).
Pre-built Images: Ready to test images bitstream, FSBL, u-boot, Linux and rootfs.
Zynq-7000 Avnet Digilent Zedboard avnet-digilent-zedboard-v20XY.Z-final.bsp Hardware: Zynq-7000 PS block (DDR, UART, SD, QSPI, Ethernet etc.) and AXI GPIO connected with led_8bits, btns_5bits, sws_8bits.
Software: FSBL, U-boot, Linux, device-tree (includes Open AMP), rootfs (minimal packages).
Pre-built Images: Ready to test images bitstream, FSBL, u-boot, Linux and rootfs.
Zynq UltraScale+ MPSoC ZCU102 (production silicon) xilinx-zcu102-v20XY.Z-final.bsp Hardware: Zynq UltraScale+ MPSoC PS block (DDR, UART, SD, QSPI, Ethernet, PCIe, DP, USB, SATA etc.)
Software: FSBL, PMUFW, ATF, U-boot, Linux, device-tree (includes Open AMP, Xen), rootfs (minimal packages).
Pre-built Images: bitstream, FSBL, PMUFW, ATF, u-boot, Linux and rootfs.
Zynq UltraScale+ MPSoC ZCU104 (production silicon) xilinx-zcu104-v20XY.Z-final.bsp Hardware: Zynq UltraScale+ MPSoC PS block (DDR, UART, SD, QSPI, Ethernet, DP, USB, SATA etc.), VCU DDR4 Controller (PL DDR) and VCU IP.
Software: FSBL, PMUFW, ATF, U-boot, Linux, device-tree (includes Open AMP, Xen), vcu-control software, rootfs (with GStreamer, OpenMAX, V4L2, libdrm, vcu-examples).
Pre-built Images: bitstream, FSBL, PMUFW, ATF, u-boot, Linux and rootfs.
Zynq UltraScale+ MPSoC ZCU106 (production silicon) xilinx-zcu106-v20XY.Z-final.bsp Hardware: Zynq UltraScale+ MPSoC PS block (DDR, UART, SD, QSPI, Ethernet, PCIe, DP, USB, SATA etc.), VCU DDR4 Controller (PL DDR) and VCU IP.
Software: FSBL, PMUFW, ATF, U-boot, Linux, device-tree (includes Open AMP, Xen), vcu-control software, rootfs (with GStreamer, OpenMAX, V4L2, libdrm, vcu-examples).
Pre-built Images: bitstream, FSBL, PMUFW, ATF, u-boot, Linux and rootfs.
Zynq UltraScale+ RFSoC ZCU111 (production silicon) xilinx-zcu111-v20XY.Z-final.bsp Hardware: Zynq UltraScale+ RFSoC PS block (DDR, UART, SD, QSPI, Ethernet, DP, USB, SATA etc.) and rf_data_converters, sd_fec_dec, adc_sink, dac_source, axi_gpio, axi_intc IPs.
Software: FSBL, PMUFW, ATF, U-boot, Linux, device-tree (includes Open AMP, Xen), rfdc-drivers, rootfs (includes RDFC example apps).
Pre-built Images: bitstream, FSBL, PMUFW, ATF, u-boot, Linux and rootfs.
Zynq UltraScale+ RFSoC ZCU1275 xilinx-zcu1275-v20XY.Z-final.bsp Hardware: Zynq UltraScale+ RFSoC PS block (DDR, UART, SD, QSPI, Ethernet, DP, USB, SATA etc.) and rf_data_converters, adc_sink, dac_source, axi_gpio, axi_intc IPs.
Software: FSBL, PMUFW, ATF, U-boot, Linux, device-tree (includes Open AMP, Xen), rfdc-drivers, rootfs (includes RDFC example apps).
Pre-built Images: bitstream, FSBL, PMUFW, ATF, u-boot, Linux and rootfs.
Zynq UltraScale+ RFSoC ZCU1285 xilinx-zcu1285-v20XY.Z-final.bsp Hardware: Zynq UltraScale+ RFSoC PS block (DDR, UART, SD, QSPI, Ethernet, DP, USB, SATA etc.) and rf_data_converters, adc_sink, dac_source, axi_gpio, axi_intc IPs.
Software: FSBL, PMUFW, ATF, U-boot, Linux, device-tree (includes Open AMP, Xen), rfdc-drivers, rootfs (includes RDFC example apps).
Pre-built Images: bitstream, FSBL, PMUFW, ATF, u-boot, Linux and rootfs.
Zynq UltraScale+ RFSoC ZCU208 xilinx-zcu208-v20XY.Z-final.bsp Hardware: Zynq UltraScale+ RFSoC PS block (DDR, UART, SD, QSPI, Ethernet etc.) and ADC_DDR_DMA, DAC_DDR_DMA CLOCKING blocks, axi_gpio IPs.
Software: FSBL, PMUFW, ATF, U-Boot, Linux, device-tree (includes open-amp, xen), rfclk, rfdc-drivers, rootfs (includes RFCLK and RDFC example apps).
Pre-built Images: bitstream, FSBL, PMUFW, ATF, u-boot, Linux and rootfs.
Zynq UltraScale+ RFSoC ZCU216 xilinx-zcu216-v20XY.Z-final.bsp Hardware: Zynq UltraScale+ RFSoC PS block (DDR, UART, SD, QSPI, Ethernet etc.) and ADC_DDR_DMA, DAC_DDR_DMA CLOCKING blocks, axi_gpio IPs.
Software: FSBL, PMUFW, ATF, U-Boot, Linux, device-tree (includes open-amp, xen), rfclk, rfdc-drivers, rootfs (includes RFCLK and RDFC example apps).
Pre-built Images: bitstream, FSBL, PMUFW, ATF, u-boot, Linux and rootfs.

Note: The “ sstate-cache" (sstate\_\_2020.1.tar.gz) file can be found on the Xilinx [download](https://www.xilinx.com/support/download/index.html/content/xilinx/en/downloadNav/embedded-design-tools/2020-1.html) area along with an associated [README](https://www.xilinx.com/member/forms/download/xef.html?filename=sstate_rel_2020.1_README.tar.gz) file that outlines the procedure to use "sstate cache".

Refer to the attached file “2020.1_PetaLinux_Packages_List” for software package versions tested on host machines, which is required for PetaLinux installation tools.

See also the attached README.

PetaLinux 2020.1 contains the following build collateral:

Component Git Repo Git Branches Git Tags Commit ID Comments
FSBL git://github.com/Xilinx/embeddedsw.git release-2020.1 xilinx-v2020.1 6cbb920f4de9e650dc361b8e487f139fd4c3c743 FSBL for Zynq-7000 is at embeddedsw/lib/sw_apps/zynq_fsbl
FSBL for Zynq UltraScale+ is at embeddedsw/lib/sw_apps/zynqmp_fsbl
PMU Firmware git://github.com/Xilinx/embeddedsw.git release-2020.1 xilinx-v2020.1 6cbb920f4de9e650dc361b8e487f139fd4c3c743 PMU for Zynq UltraScale+ Firmware is at embeddedsw/lib/sw-apps/zynqmp_pmufw
Device-tree git://github.com/Xilinx/device-tree-xlnx.git master xilinx-v2020.1 bc8445833318e9320bf485ea125921eecc3dc97a  
Linux git://github.com/Xilinx/linux-xlnx.git xlnx_rebase_v5.4 xlnx_rebase_v5.4_2020.1 22b71b41620dac13c69267d2b7898ebfb14c954e Linux Kernel rebase version 5.4
U-Boot git://github.com/Xilinx/u-boot-xlnx.git xlnx_rebase_v2020.01 xlnx_rebase_v2020.01_2020.1 86c84c0d0f916ec00d5d76a32dc9372a25429ca9 U-Boot Version v2020.01
QEMU git://github.com/Xilinx/qemu.git master xilinx-v2020.1 e371d99ac19b9c4f3f98e6e6a3db1ea95091a50e  
Xen git://github.com/Xilinx/xen.git xilinx/release-2020.1 xilinx-v2020.1 775913b2892a8c9b08dfa3db81b1cf93798399aa Xen Version 4.13
ARM-Trusted-Firmware (ATF) git://github.com/Xilinx/arm-trusted-firmware.git xlnx_rebase_v2.2 xilinx-v2020.1 5918e656ef29dbdf234a6324ec85bc8a68eca113 ATF is based on upstream version 2.2
Yocto git://github.com/Xilinx/meta-xilinx.git
git://github.com/Xilinx/meta-xilinx-tools.git
git://github.com/Xilinx/meta-petalinux.git		 rel-v2020.1 No Tags 7631da21ae8552cd3f562c81ab541ac54fc6a382
38ab571b4ec58e820636309bd66c6b03be59a39c
0fc49cd7d25481aef7b99cb9adb9f1416d652bd9		 Yocto 3.0.0 Zeus
qemu-devicetrees git://github.com/Xilinx/qemu-devicetrees.git branch/xilinx-v2020.1 xilinx-v2020.1 f128c06a10d45cfeadeb0fbff01ac63eaaaa104d  
OpenAMP git://github.com/Xilinx/open-amp.git master xilinx-v2020.1 7014401c4a720dcdc1472ccd530cce1eb046454e  
libmetal git://github.com/Xilinx/libmetal.git master xilinx-v2020.1 9ee43dbed82c088fdb91a1dbb8ba6ae4a2d18050  
VCU OpenMax IL git://github.com/Xilinx/vcu-omx-il.git release-2020.1 xilinx-v2020.1 b5ffa7ec36814cb52c1616dffea2c4ced51fee19  
VCU Control Software git://github.com/Xilinx/vcu-ctrl-sw.git release-2020.1 xilinx-v2020.1 8ad2b1323bdc98d580360e1a01006d70625c4e65  
VCU Firmware git://github.com/Xilinx/vcu-firmware.git release-2020.1 xilinx-v2020.1 7ecfd476deb054f354791cc1300ccba069e234f5  
VCU Modules git://github.com/Xilinx/vcu-modules.git release-2020.1 xilinx-v2020.1 38827a9172cfb1f0243547c04b2babc045d411ee  
GStreamer OpenMax IL git://github.com/Xilinx/gst-omx.git xilinx-master xilinx-v2020.1 a051c245c3e9f4d323d2fc697a9faf18264b6ffb GStreamer version 1.16.1
GStreamer Plugins-Base git://github.com/Xilinx/gst-plugins-base.git release-2020.1 xilinx-v2020.1 ffc05bce0bc02cb2cafd50914f01640dab47f274  
GStreamer Plugins-Bad git://github.com/Xilinx/gst-plugins-bad.git release-2020.1 xilinx-v2020.1 19b2018f2c31c0011c78fa7300544165739dc91a  
GStreamer Plugins-Good git://github.com/Xilinx/gst-plugins-good.git release-2020.1 xilinx-v2020.1 9aa8f9b9f1b5de43fa8557485d23fcb42d77d95d  
GStreamer git://github.com/Xilinx/gstreamer.git release-2020.1 xilinx-v2020.1 10db9688beab0b11ea2e8c5b05d78c57a589ad03  
hdmi-modules git://github.com/Xilinx/hdmi-modules.git rel-v2020.1 xilinx-v2020.1 3a6e440b50263a3ed99492aba3e507d7c130355c  
GCC         MB compiler version 9.2
ARM compiler version 9.2

2020.1 Release Notes for Open Source components wiki page:

Covers details for below components changes (new features/fixes) in a particular release.

https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/541130754/2020.1+Release+Notes+for+Open+Source+Components

2020.1 Release pre-built images wiki page:

https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/559875220/2020.1+Release

2020.1 New Features:

Note: Versal content are in bold font

PetaLinux

  • Upgraded to Yocto Project version to 3.0 Zeus release
  • Upgraded GCC too chain version to 9.2
  • Host OS dependent packages are part of PetaLinux tools
    • gpg, make unzip, wget, diffstat, chrpath, socat, tar, bzip2, gzip and diffutils are part of PetaLinux tool now and there is no need to install as Host OS dependency packages
  • Added support for selecting desired Yocto eSDK when installing PetaLinux tool, so you can install PetaLinux tools for specific platforms only such as MicroBlaze, Zynq-7000, ZynqMP and Versal.
  • Added support for upgrading desired Yocto eSDK with already installed PetaLinux tool, means you can upgrade PetaLinux tools for specific platforms only such as MicroBlaze, Zynq-7000, ZynqMP and Versal from current version to release version.
  • Reduced installed tool size by removing minimal download and sstate cache files.
  • Yocto eSDK now is part of PetaLinux tools.
  • Added warnings message if the xsa changes in the specified directory.
  • Removed meta-plnx-generated layer from PetaLinux project to minimize build time.
  • Added compiler configuration in petalinux-config options for PMUFW and FSBL where you can pass PMUFW/FSBL Debug or Compiler flags to build.
  • Added support for remote source for apps when you create apps using petalinux-create commands.
  • Default PetaLinux build images are INITRD based.
  • Added support for building open source bootgen from PetaLinux for on-target use.
  • Added archiver option in petalinux-build command which will pack all the source and licenses of petalinux-build packages.
  • Added support for SD Image creation with required boot partition using Yocto WIC utility.
  • Added support for mechanism and infrastructure for users to work with readily available dtsi files instead of relying on XSA for FPGA Manager.
  • Added support for xen-image-builder in PetaLinux where it generates a U-Boot script with kernel offsets auto-calculated that can be used to load all of the binaries automatically and boot the full system.
  • Added support for unified kernel and rootfs images
    • Zynq-7000 devices
    • Zynq UltraScale+ MPSoC/RFSoC devices
    • Versal devices

GPU MALI-400

  • Mali headless egl backend now supports pixmap surface (particularly arm specific handle for dmabuf).
  • Incremental performance change over render to texture.

2020.1 Bug Fixes:

Note: Versal content are in bold font

PetaLinux

  • Fixed Debugging Linux kernel breaking point issue using Vitis.
  • Fixed U-boot QSPI flash configuration for maximum read speed.
  • Fixed XSA with MicroBlaze not working using PetaLinux 2019.2 release.
  • Fixed PetaLinux hang issue when you package R5 application to BOOT.bin using BIF attributes.
  • Fixed PetaLinux kernel config using bsg.cfg not propagating through kernel menuconfig.
  • Fixed PetaLinux “devtool update-recipe” issue for U-boot
  • Fixed Warning messages when sourcing PetaLinux tools on RHEL 7.6 
  • Updated U-boot deconfigs for MicroBlaze BSP.
  • Fixed error messages which copying images to /tftpboot directory.
  • Fixed build errors when external source pathc is assigned to a variable.
  • Fixed PetaLinux VCK190 and VMK180 BSP nomenclature.

GPU MALI-400

  • Fixed Pixmap offscreen rendering issue using MALI Headless backend.
  • Fixed eglCreateImageKHR API not working for YUYV format.

Known Issues for 2020.1:

Linux/Baremetal Components Description Work-around To be fixed version
Linux PetaLinux Zynq UltraScale+ MPSoC: How to enable UHS (SD 3.0) support for ZCU102 and ZCU106 evaluation board PetaLinux BSPs (Xilinx Answer 69978)  
Linux XSDK Zynq UltraScale+ MPSoC: Connecting XSDB to Linux CPU idle (Xilinx Answer 69143)  
Linux FSBL Zynq UltraScale+ MPSoC: How to achieve SATA performance in Linux (Xilinx Answer 71584)  
Linux FSBL Zynq UltraScale+ MPSoC: How to make SMMU work with SATA IP (Xilinx Answer 71790)  
Linux PetaLinux 2020.1 PetaLinux: Configuring project with same xsa more than once will delete all the files from hw-description directory (Xilinx Answer 75213) 2020.2
Linux PetaLinux 2020.1 PetaLinux: Devtool Workspace location has incorrect text in help menu (Xilinx Answer 75204) 2020.2
Linux Drivers 2020.1 Zynq-7000: Ethernet Performance Numbers Lower in Linux 5.4 kernel (Xilinx Answer 75195) 2020.2
Linux Drivers 2020.1 Linux: Does Linux 5.4 kernel supports ISSI and Macronix flash QSPI drivers (Xilinx Answer 75214) 2020.2
Linux U-boot 2020.1 Zynq UltraScale+ RFSoC: Ethernet doesn’t work in U-boot on ZC1275 and ZC1285 evaluation boards (Xilinx Answer 75209) 2020.2
Linux PetaLinux 2019.1-2020.1 PetaLinux: MCS Flash boot gets stuck at FSBOOT for MicroBlaze based designs (Xilinx Answer 75155) 2020.2
Linux Drivers 2020.1 Zynq UltraScale+ MPSoC VCU: VCU demo decode display example fails to run with SD UHS mode (Xilinx Answer 75219) 2020.2
Linux Drivers 2020.1 Zynq UltraScale+ MPSoC: AXI Ethernet driver in specific MCDMA configuration throws swiotlb full error with jumbo frames (Xilinx Answer 75218) 2020.2
Linux PetaLinux 2020.1 PetaLinux: Does git based bootgen supports security features (Xilinx Answer 75327) 2020.2

2020.1_PetaLinux_Package_List

Linux Distribution OS details:

  1. RHEL 7.4, 7.5, 7.6, 7.7 and 8.1 Server: Infrastructure Server
  2. RHEL 7.4, 7.5, 7.6, 7.7 and 8.1 Desktop : Development and Creative workstation.
  3. CentOS 7.4, 7.5, 7.6, 7.7 and 8.1 Server (From Everything.ISO): Infrastructure server.
  4. CentOS 7.4, 7.5, 7.6, 7.7 and 8.1 Desktop (From Everything.ISO): Development and Creative workstation.
  5. Ubuntu 16.04.05 and Ubuntu 16.04.06 Desktop.
  6. Ubuntu 16.04.05 and Ubuntu 16.04.06 Server.
  7. Ubuntu 18.04.01, 18.04.02, 18.04.03 and Ubuntu 18.04.04 Desktop.
  8. Ubuntu 18.04.01, 18.04.02, 18.04.03 and Ubuntu 18.04.04 Server.

Note:

  1. Empty packages are not installed means assuming these are default from Linux Distribution.

Tool/Library Versions

RHEL/CentOS versions

Tool/Library Red Hat Enterprise Desktop/Server 7.4 (64-bit) Red Hat Enterprise Destop/Server 7.5(64-bit) Red Hat Enterprise Desktop/Server 7.6 (64-bit) Red Hat Enterprise Desktop/Server 7.7(64-bit) Red Hat Enterprise Desktop/Server 8.1 (64-bit) CentOS Desktop/Server 7.4 (64-bit) CentOS Desktop/Server 7.5 (64-bit) CentOS Desktop/Server 7.6 (64-bit) CentOS Desktop/Server 7.7 (64-bit) CentOS Desktop/Server 8.1 (64-bit)
Quick Installation steps for packages: su yum install net-tools gawk make wget tar bzip2.x86_64 gzip python unzip perl patch.x86_64 diffutils diffstat git cpp gcc gcc-c++ glibc-devel texinfo chrpath socat perl-Data-Dumper perl-Text-ParseWords perl-Thread-Queue python34-pip xz which SDL-devel xterm autoconf libtool.x86_64 zlib-devel automake glib2-devel zlib ncurses-devel openssl-devel dos2unix flex bison glibc.i686 screen pax glibc-devel.i686 compat-libstdc++-33.i686 libstdc++.i686                  
ip (iproute) iproute-3.10.0-87.el7.x86_64 iproute-4.11.0-14.el7.x86_64 iproute-4.11.0-14.el7.x86_64 iproute-4.11.0-25.el7_7.2.x86_64 iproute-5.3.0-1.el8.x86_64 iproute-3.10.0-87.el7.x86_64 iproute-4.11.0-14.el7.x86_64 iproute-4.11.0-14.el7.x86_64 iproute-4.11.0-25.el7_7.2.x86_64 iproute-5.3.0-1.el8.x86_64
gawk gawk-4.0.2-4.el7_3.1.x86_64 gawk-4.0.2-4.el7_3.1.x86_64 gawk-4.0.2-4.el7_3.1.x86_64 gawk-4.0.2-4.el7_3.1.x86_64 gawk-4.2.1-1.el8.x86_64 gawk-4.0.2-4.el7_3.1.x86_64 gawk-4.0.2-4.el7_3.1.x86_64 gawk-4.0.2-4.el7_3.1.x86_64 gawk-4.0.2-4.el7_3.1.x86_64 gawk-4.2.1-1.el8.x86_64
gcc gcc-4.8.5-16.el7_4.1.x86_64 gcc-4.8.5-16.el7_4.1.x86_64 gcc-4.8.5-16.el7_4.1.x86_64 gcc-4.8.5-39.el7.x86_64 gcc-8.3.1-5.el8.x86_64 gcc-4.8.5-16.el7_4.1.x86_64 gcc-4.8.5-39.el7.x86_64 gcc-4.8.5-39.el7.x86_64 gcc-4.8.5-39.el7.x86_64 gcc-8.3.1-5.el8.x86_64
netstat (net-tools) net-tools-2.0-0.22.20131004git.el7.x86_64 net-tools-2.0-0.25.20131004git.el7.x86_64 net-tools-2.0-0.24.20131004git.el7.x86_64 net-tools-2.0-0.25.20131004git.el7.x86_64 net-tools-2.0-0.51.20160912git.el8.x86_64 net-tools-2.0-0.24.20131004git.el7.x86_64 net-tools-2.0-0.22.20131004git.el7.x86_64 net-tools-2.0-0.24.20131004git.el7.x86_64 net-tools-2.0-0.25.20131004git.el7.x86_64 net-tools-2.0-0.51.20160912git.el8.x86_64
ncurses-devel(libncurses5-dev) ncurses-devel-5.9-14.20130511.el7_4.x86_64 ncurses-devel-5.9-14.20130511.el7_4.x86_64 ncurses-devel-5.9-14.20130511.el7_4.x86_64 ncurses-devel-5.9-14.20130511.el7_4.x86_64 ncurses-devel-6.1-7.20180224.el8.x86_64 ncurses-devel-5.9-14.20130511.el7_4.x86_64 ncurses-devel-5.9-14.20130511.el7_4.x86_64 ncurses-devel-5.9-14.20130511.el7_4.x86_64 ncurses-devel-5.9-14.20130511.el7_4.x86_64 ncurses-devel-6.1-7.20180224.el8.x86_64
zlib-devel(also,install 32-bit of this version) zlib-devel-1.2.7-18.el7.x86_64 zlib-devel-1.2.7-18.el7.x86_64 zlib-devel-1.2.7-18.el7.x86_64 zlib-devel-1.2.7-18.el7.x86_64 zlib-devel-1.2.11-13.el8.x86_64 zlib-devel-1.2.7-18.el7.x86_64 zlib-devel-1.2.7-18.el7.x86_64 zlib-devel-1.2.7-18.el7.x86_64 zlib-devel-1.2.7-18.el7.x86_64 zlib-devel-1.2.11-13.el8.x86_64
openssl-devel openssl-devel-1.0.2k-8.el7.x86_64 openssl-devel-1.0.2k-19.el7.x86_64 openssl-devel-1.0.2k-19.el7.x86_64 openssl-devel-1.0.2k-19.el7.x86_64 openss-devell-1.1.1c-15.el8.x86_64 openssl-devel-1.0.2k-19.el7.x86_64 openssl-devel-1.0.2k-19.el7.x86_64 openssl-devel-1.0.2k-19.el7.x86_64 openssl-devel-1.0.2k-19.el7.x86_64 openss-devell-1.1.1c-15.el8.x86_64
flex flex-2.5.37-3.el7.x86_64 flex-2.5.37-3.el7.x86_64 flex-2.5.37-3.el7.x86_64 flex-2.5.37-6.el7.x86_64 flex-2.5.37-3.el7.x86_64 flex-2.5.37-3.el7.x86_64 flex-2.5.37-6.el7.x86_64 flex-2.5.37-6.el7.x86_64 flex-2.5.37-6.el7.x86_64 flex-2.5.37-3.el7.x86_64
bison flex-2.5.37-3.el7.x86_64 bison-3.0.4-1.el7.x86_64 bison-3.0.4-1.el7.x86_64 flex-2.5.37-6.el7.x86_64 flex-2.5.37-3.el7.x86_64 bison-3.0.4-1.el7.x86_64 bison-3.0.4-2.el7.x86_64 flex-2.5.37-6.el7.x86_64 flex-2.5.37-6.el7.x86_64 flex-2.5.37-3.el7.x86_64
libselinux libselinux-2.5-11.el7.x86_64 libselinux-2.5-14.1.el7.x86_64 libselinux-2.5-14.1.el7.x86_64 libselinux-2.5-14.1.el7.x86_64 libselinux-2.9-3.el8.x86_64 libselinux-2.5-14.1.el7.x86_64 libselinux-2.5-12.1.el7.x86_64 libselinux-2.5-14.1.el7.x86_64 libselinux-2.5-14.1.el7.x86_64 libselinux-2.9-3.el8.x86_64
xterm xterm-295-3.el7.x86_64 xterm-295-3.el7.x86_64 xterm-295-3.el7.x86_64 xterm-295-3.el7.x86_64 xterm-331-1.el8.x86_64 xterm-295-3.el7.x86_64 xterm-295-3.el7.x86_64 xterm-295-3.el7.x86_64 xterm-295-3.el7.x86_64 xterm-331-1.el8.x86_64
autoconf autoconf-2.69-11.el7.noarch autoconf-2.69-11.el7.noarch autoconf-2.69-11.el7.noarch autoconf-2.69-11.el7.noarch autoconf-2.69-27.el8.noarch autoconf-2.69-11.el7.noarch autoconf-2.69-11.el7.noarch autoconf-2.69-11.el7.noarch autoconf-2.69-11.el7.noarch autoconf-2.69-27.el8.noarch
libtool libtool-2.4.2-22.el7_3.x86_64 libtool-2.4.2-22.el7_3.x86_64 libtool-2.4.2-22.el7_3.x86_64 libtool-2.4.2-22.el7_3.x86_64 libtool-2.4.6-25.el8.x86_64 libtool-2.4.2-22.el7_3.x86_64 libtool-2.4.2-22.el7_3.x86_64 libtool-2.4.2-22.el7_3.x86_64 libtool-2.4.2-22.el7_3.x86_64 libtool-2.4.6-25.el8.x86_64
texinfo texinfo-5.1-5.el7.x86_64 texinfo-5.1-5.el7.x86_64 texinfo-5.1-5.el7.x86_64 texinfo-5.1-5.el7.x86_64 texinfo-5.1-5.el7.x86_64 texinfo-5.1-5.el7.x86_64 texinfo-5.1-5.el7.x86_64 texinfo-5.1-5.el7.x86_64 texinfo-5.1-5.el7.x86_64 texinfo-5.1-5.el7.x86_64
zlib1g-dev                    
gcc-multilib                    
build-essential                    
SDL-devel SDL-devel-1.2.15-14.el7.x86_64 SDL-devel-1.2.15-14.el7.x86_64 SDL-devel-1.2.15-14.el7.x86_64 SDL-devel-1.2.15-14.el7.x86_64 SDL-1.2.15-37.el8.x86_64 SDL-devel-1.2.15-14.el7.x86_64 SDL-devel-1.2.15-14.el7.x86_64 SDL-devel-1.2.15-14.el7.x86_64 SDL-devel-1.2.15-14.el7.x86_64 SDL-1.2.15-37.el8.x86_64
glibc-devel glibc-devel-2.17-292.el7.x86_64 glibc-devel-2.17-292.el7.x86_64 glibc-devel-2.17-307.el7.x86_64 glibc-devel-2.17-307.el7.1.x86_64 glibc-devel-2.28-101.el8.x86_64 glibc-devel-2.17-292.el7.x86_64 glibc-devel-2.17-307.el7.x86_64 glibc-devel-2.17-292.el7.x86_64 glibc-devel-2.17-307.el7.1.x86_64 glibc-devel-2.28-101.el8.x86_64
                     
glib2-devel glib2-devel-2.56.1-5.el7.x86_64 glib2-devel-2.56.1-5.el7.x86_64 glib2-devel-2.56.1-5.el7.x86_64 glib2-devel-2.56.1-5.el7.x86_64 glib2-2.56.4-8.el8.x86_64 glib2-devel-2.56.1-5.el7.x86_64 glib2-devel-2.56.1-5.el7.x86_64 glib2-devel-2.56.1-5.el7.x86_64 glib2-devel-2.56.1-5.el7.x86_64 glib2-2.56.4-8.el8.x86_64
automake automake-1.13.4-3.el7.noarch automake-1.13.4-3.el7.noarch automake-1.13.4-3.el7.noarch automake-1.13.4-3.el7.noarch automake-1.16.1-6.el8.noarch automake-1.13.4-3.el7.noarch automake-1.13.4-3.el7.noarch automake-1.13.4-3.el7.noarch automake-1.13.4-3.el7.noarch automake-1.16.1-6.el8.noarch
screen gnome-screenshot-3.22.0-1.el7.x86_64 gnome-screenshot-3.22.0-1.el7.x86_64 gnome-screenshot-3.22.0-1.el7.x86_64 gnome-screenshot-3.22.0-1.el7.x86_64 gnome-screenshot-3.22.0-1.el7.x86_64 gnome-screenshot-3.22.0-1.el7.x86_64 gnome-screenshot-3.22.0-1.el7.x86_64 gnome-screenshot-3.22.0-1.el7.x86_64 gnome-screenshot-3.22.0-1.el7.x86_64 gnome-screenshot-3.22.0-1.el7.x86_64
pax pax-3.4-19.el7.x86_64 pax-3.4-19.el7.x86_64 pax-3.4-19.el7.x86_64 gnome-screenshot-3.22.0-1.el7.x86_64 pax-3.4-19.el7.x86_64 pax-3.4-19.el7.x86_64 pax-3.4-19.el7.x86_64 gnome-screenshot-3.22.0-1.el7.x86_64 gnome-screenshot-3.22.0-1.el7.x86_64 pax-3.4-19.el7.x86_64
libstdc++ libstdc++-4.8.5-39.el7_4.1.x86_64 libstdc++-4.8.5-16.el7_4.1.x86_64 libstdc++-4.8.5-39.el7_4.1.x86_64 libstdc++-4.8.5-39.el7.x86_64 libstdc++-8.3.1-5.el8.x86_64 libstdc++-4.8.5-16.el7_4.1.x86_64 libstdc++-4.8.5-39.el7.x86_64 libstdc++-4.8.5-39.el7.x86_64 libstdc++-4.8.5-39.el7.x86_64 libstdc++-8.3.1-5.el8.x86_64
g++ (gcc-c++) gcc-c++-4.8.5-16.el7_4.1.x86_64 gcc-c++-4.8.5-16.el7_4.1.x86_64 gcc-c++-4.8.5-16.el7_4.1.x86_64 gcc-c++-4.8.5-39.el7.x86_64 gcc-c++-8.3.1-5.el8.x86_64 gcc-c++-4.8.5-16.el7_4.1.x86_64 gcc-c++-4.8.5-39.el7_4.1.x86_64 gcc-c++-4.8.5-39.el7.x86_64 gcc-c++-4.8.5-39.el7.x86_64 gcc-c++-8.3.1-5.el8.x86_64
python3 python34-pip-8.1.2-10.el7.noarch python34-pip-8.1.2-10.el7.noarch python34-pip-8.1.2-10.el7.noarch python34-pip-8.1.2-10.el7.noarch python34-pip-8.1.2-10.el7.noarch glibc-devel-2.17.292.el7.x86-64 python34-pip-8.1.2-10.el7.noarch python34-pip-8.1.2-10.el7.noarch python34-pip-8.1.2-10.el7.noarch python34-pip-8.1.2-10.el7.noarch

Ubuntu

Tool/Library Ubuntu Desktop /Server 16.04.05(64-bit) Ubuntu Desktop /Server 16.04.06 (64-bit) Ubuntu Desktop /Server 18.04.01 (64-bit) Ubuntu Desktop /Server 18.04.02 (64-bit) Ubuntu Desktop /Server 18.04.03 (64-bit) Ubuntu Desktop /Server 18.04.04 (64-bit)
Quick Installation steps for packages: sudo apt-get install gawk python build-essential gcc git make net-tools libncurses5-dev tftpd zlib1g-dev libssl-dev flex bison libselinux1 gnupg wget diffstat chrpath socat xterm autoconf libtool tar unzip texinfo zlib1g-dev gcc-multilib build-essential-dev zlib1g:i386 screen pax gzip          
ip (iproute)            
gawk gawk-1:4.1.3+dfsg-0.1 gawk-1:4.1.3+dfsg-0.1 gawk-1:4.1.4+dfsg-1build1 gawk-1:4.1.4+dfsg-1build1 gawk-1:4.1.4+dfsg-1build1 gawk-1:4.1.4+dfsg-1build1
gcc gcc-4:5.3.1-1ubuntu1 500 gcc-4:5.3.1-1ubuntu1 500 gcc-4:7.4.0-1ubuntu2.3 gcc-4:7.4.0-1ubuntu2.3 gcc-4:7.4.0-1ubuntu2.3 gcc-4:7.4.0-1ubuntu2.3
netstat (net-tools) net-tools-1.60-26ubuntu1 500 net-tools-1.60-26ubuntu1 500 net-tools-1.60+git20161116.90da8a0-1ubuntu1 net-tools-1.60+git20161116.90da8a0-1ubuntu1 net-tools-1.60+git20161116.90da8a0-1ubuntu1 net-tools-1.60+git20161116.90da8a0-1ubuntu1
ncurses-devel(libncurses5-dev) ncurses-devel-6.0+20160213-1ubuntu1 ncurses-devel-6.0+20160213-1ubuntu1 ncurses-devel-6.1-1ubuntu1.18.04 ncurses-devel-6.1-1ubuntu1.18.04 ncurses-devel-6.1-1ubuntu1.18.04 ncurses-devel-6.1-1ubuntu1.18.04
zlib-devel(also,install 32-bit of this version)            
openssl-devel openssl-devel-1.0.2g-1ubuntu4.15 openssl-devel-1.0.2g-1ubuntu4.15 openssl-devel-1.1.1-ubuntu2.1~18.04.4 openssl-devel-1.1.1-ubuntu2.1~18.04.4 openssl-devel-1.1.1-ubuntu2.1~18.04.4 openssl-devel-1.1.1-ubuntu2.1~18.04.4
flex flex-2.6.0-11 flex-2.6.0-11 flex-2.6.4-6 flex-2.6.4-6 flex-2.6.4-6 flex-2.6.4-6
bison bison-2:3.0.4.dfsg-1 bison-2:3.0.4.dfsg-1 bison-2:3.0.4.dfsg-1build1 bison-2:3.0.4.dfsg-1build1 bison-2:3.0.4.dfsg-1build1 bison-2:3.0.4.dfsg-1build1
libselinux            
xterm xterm-322-1ubuntu1 xterm-322-1ubuntu1 xterm-330-1ubuntu2 xterm-330-1ubuntu2 xterm-330-1ubuntu2 xterm-330-1ubuntu2
autoconf autoconf-2.69-9 autoconf-2.69-9 autoconf-2.69-11 autoconf-2.69-11 autoconf-2.69-11 autoconf-2.69-11
libtool libtool-2.4.6-0.1 libtool-2.4.6-0.1 libtool-2.4.6-2 libtool-2.4.6-2 libtool-2.4.6-2 libtool-2.4.6-2
texinfo texinfo-6.1.0.dfsg.1-5 texinfo-6.1.0.dfsg.1-5 texinfo-6.5.0.dfsg.1-2 texinfo-6.5.0.dfsg.1-2 texinfo-6.5.0.dfsg.1-2 texinfo-6.5.0.dfsg.1-2
zlib1g-dev zlib1g-dev1:1.2.8.dfsg-2ubuntu4.1 zlib1g-dev1:1.2.8.dfsg-2ubuntu4.1 zlib1g-dev1:1.2.11.dfsg-0ubuntu2 zlib1g-dev1:1.2.11.dfsg-0ubuntu2 zlib1g-dev1:1.2.11.dfsg-0ubuntu2 zlib1g-dev1:1.2.11.dfsg-0ubuntu2
gcc-multilib gcc-multilib-4:5.3.1-1ubuntu1 gcc-multilib-4:5.3.1-1ubuntu1 gcc-multilib-4:7.4.0-1ubuntu2.3 gcc-multilib-4:7.4.0-1ubuntu2.3 gcc-multilib-4:7.4.0-1ubuntu2.3 gcc-multilib-4:7.4.0-1ubuntu2.3
build-essential build-essential-12.1ubuntu2 build-essential-12.1ubuntu2 build-essential-12.4ubuntu1 build-essential-12.4ubuntu1 build-essential-12.4ubuntu1 build-essential-12.4ubuntu1
SDL-devel            
glibc-devel            
             
glib2-devel            
automake automake-1:1.15-4ubuntu1 automake-1:1.15-4ubuntu1 automake-1:1.15.1-3ubuntu2 automake-1:1.15.1-3ubuntu2 automake-1:1.15.1-3ubuntu2 automake-1:1.15.1-3ubuntu2
screen screen-4.3.1-2build1 screen-4.3.1-2build1 screen-4.6.2-1ubuntu1 screen-4.6.2-1ubuntu1 screen-4.6.2-1ubuntu1 screen-4.6.2-1ubuntu1
pax pax-1:20151013-1 pax-1:20151013-1 pax-1:20171021-2 pax-1:20171021-2 pax-1:20171021-2 pax-1:20171021-2
libstdc++ libstdc++-5.4.0-6ubuntu1~16.04.9cross1 libstdc++-5.4.0-6ubuntu1~16.04.9cross1 libstdc++-6.5.0-2ubuntu1~18.04 libstdc++-8.3.0-6ubuntu1~18.04.1 libstdc++-8.3.0-6ubuntu1~18.04.1 libstdc++-8.3.0-6ubuntu1~18.04.1
g++ (gcc-c++) gcc-c++-4:5.3.1-1ubuntu1 gcc-c++-4:5.3.1-1ubuntu1 gcc-c++-4:7.4.0-1ubuntu2.3 gcc-c++-7.4.0-1ubuntu1~18.04.1 gcc-c++-7.4.0-1ubuntu1~18.04.1 gcc-c++-7.4.0-1ubuntu1~18.04.1
python3 python34-pip-19.3.1 python34-pip-19.3.1 python34-pip-19.3.1 python34-pip-19.3.1 python34-pip-19.3.1 python34-pip-19.3.1

README_content_v2020_1

=============================

Contents in the download area

In the download area along with the PetaLinux tool installer and BSPs for various HW. The following content is also available for download:

  1. PetaLinux 2020.1 License and copyrights info (TAR/GZIP) file:

    This file contains the copyright headers of all the SW components shipped as part of the PetaLinux tool. It also contains the copyright headers for all the SW packages, available at https://petalinux.xilinx.com/ that petaLinux tool packages in the project, when selected. This file is provide as part of legal requirement for your viewing only. It is not required to be downloaded for using the PetaLinux tool or BSPs.

​

  1. PetaLinux 2020.1 Open Components Source Code (TAR/GZIP) file:

This file contains the source code of all the SW components shipped as  part of the PetaLinux tool. It also contains the source code for all the  SW packages, available at https://petalinux.xilinx.com/ that petaLinux tool packages  in the project, when selected. This file is provide as part of legal requirement  for your viewing only. It is not required to be downloaded for using  the PetaLinux tool or BSPs.

Sample list of components in the files 1) and 2):

	QEMU

	busybox

	mtd-utils

	libfdt

	dtc

	u-boot

	device-tree-generator

	iso-codes

	ca-certificates

	db

	bash

	Linux

	ATF

	XEN

	kconfig-frontends

	Note: more than 1000 other SW components.