Title
000035572 - PetaLinux 2023.2 - Product Update Release Notes and Known Issues
Description
This Answer Record acts as the release notes for PetaLinux 2023.2 and contains links to information about resolved issues and updated collateral contained in this release.
Please find the installation requirements specified in our user guide here.
The packages required for installation per OS can also be found in the attached .xlsx (found at the bottom of this page)
Solution
BSPs supported for the PetaLinux 2023.2 Release
This table contains supported BSPs for Zynq 7000, MicroBlaze, Zynq UltraScale+ MPSoC, and Versal available on the Embedded Development download page.
| SNO | Platform | Variant | BSP Name | BSP Description |
|---|---|---|---|---|
| 1 | MicroBlaze | AC701 | xilinx-ac701-v2023.2-10140544.bsp | This BSP contains: Hardware: Vivado board preset example design with MicroBlaze Processor, core peripherals IPs such as AXI UART Lite, AXI 1G/2.5G Ethernet, AXI I2C, AXI GPIO, AXI DDR controller, SPI flash, led_4bits. Software: fs-boot, U-Boot, Linux, device-tree, rootfs (minimal packages). Pre-built Images: Ready to test bitstream, fs-boot, U-Boot, Linux, and rootfs. |
| 2 | MicroBlaze | KC705 | xilinx-kc705-v2023.2-10140544.bsp | This BSP contains: Hardware: Vivado board preset example design with MicroBlaze Processor, peripherals such as AXI UART Lite, AXI 1G/2.5G Ethernet, AXI I2C, AXI GPIO, AXI DDR controller, Linear flash, led_8bits. Software: fs-boot, U-Boot, Linux, device-tree, rootfs (minimal packages). Pre-built Images: Ready to test bitstream, fs-boot, U-Boot, Linux, and rootfs. |
| 3 | MicroBlaze | KCU105 | xilinx-kcu105-v2023.2-10140544.bsp | This BSP contains: Hardware: Vivado board preset example design with MicroBlaze Processor, peripherals like AXI UART Lite, AXI I2C, AXI GPIO, AXI DDR controller, AXI QSPI, led_8bits, and AXI 1G/2.5G Ethernet. Software: fs-boot, U-Boot, Linux, device-tree, rootfs (minimal packages). Pre-built Images: Ready to test bitstream, fs-boot, U-Boot, Linux, and rootfs. |
| 4 | MicroBlaze | SP701 | xilinx-sp701-v2023.2-10140544.bsp | This BSP contains: Hardware: Vivado board preset example design with MicroBlaze Processor and peripherals such as AXI I2C, AXI GPIO, AXI DDR controller, AXI QSPI, AXI UART Lite, led_8bits, and AXI 1G/2.5G Ethernet. Software: fs-boot, U-Boot, Linux, device-tree, rootfs (minimal packages). Pre-built Images: Ready to test bitstream, fs-boot, U-Boot, Linux, and rootfs. |
| 5 | MicroBlaze | VCU118 | xilinx-vcu118-v2023.2-10140544.bsp | This BSP contains: Hardware: Vivado board preset example design with MicroBlaze Processor, peripherals such as AXI I2C, AXI GPIO, AXI DDR controller, AXI QSPI, AXI UART Lite, led_8bits, and AXI 1G/2.5G Ethernet. Software: fs-boot, U-Boot, Linux, device-tree, rootfs (minimal packages). Pre-built Images: Ready to test bitstream, fs-boot, U-Boot, Linux, and rootfs. |
| 6 | Zynq 7000 | ZC702 | xilinx-zc702-v2023.2-10140544.bsp | This BSP contains: Hardware: Uses Vivado board presets with Zynq 7000 PS block (DDR, UART, SD, QSPI, Ethernet, etc.) and AXI GPIO with led_4bits. Software: FSBL, U-Boot, Linux, device-tree (includes open-amp), rootfs (minimal packages). Pre-built Images: Ready to test bitstream, FSBL, U-Boot, Linux, and rootfs. |
| 7 | Zynq 7000 | ZC706 | xilinx-zc706-v2023.2-10140544.bsp | This BSP contains: Hardware: Vivado board presets with Zynq 7000 PS block (DDR, UART, SD, QSPI, Ethernet, etc.), AXI GPIO with led_4bits, dip_switches_4bits, gpio_sws_3bits. Software: FSBL, U-Boot, Linux, device-tree (includes open-amp), rootfs (minimal packages). Pre-built Images: Ready to test bitstream, FSBL, U-Boot, Linux, and rootfs. |
| 8 | Zynq UltraScale+ MPSoC | ZCU102 production silicon | xilinx-zcu102-v2023.2-10140544.bsp | This BSP contains: Hardware (Extensible Platform): Vivado presets with Zynq UltraScale+ MPSoC PS block (DDR, UART, SD, QSPI, Ethernet, PCIe, DP, USB, SATA, etc.), PL proc_sys_reset, axi_vip, axi_intc, axi_interconnect, axi_register_slice IPs. Vitis: pfm.tcl packed for Vitis platform generation. Software: FSBL, PMUFW, TF-A, U-Boot, Linux, device-tree (includes open-amp, Xen), Ramdisk rootfs (minimal) and full rootfs. Pre-built Images: Ready to test bitstream, FSBL, PMUFW, TF-A, U-Boot, Linux, and rootfs. |
| 9 | Zynq UltraScale+ MPSoC | ZCU104 production silicon | xilinx-zcu104-v2023.2-10140544.bsp | This BSP contains: Hardware (Extensible Platform): Vivado presets with Zynq UltraScale+ MPSoC PS block (DDR, UART, SD, QSPI, Ethernet, DP, USB, SATA, etc.), VCU DDR4 Controller (PL DDR), VCU IP, clk_wiz, axi_interconnect, proc_sys_reset IPs. Vitis: pfm.tcl packed for Vitis platform generation. Software: FSBL, PMUFW, TF-A, U-Boot, Linux, device-tree (includes open-amp, Xen), vcu-control software, Ramdisk rootfs (minimal) and full rootfs (includes GStreamer, OpenMAX, V4L2, libdrm, vcu-examples). Pre-built Images: Ready to test bitstream, FSBL, PMUFW, TF-A, U-Boot, Linux, and rootfs. |
| 10 | Zynq UltraScale+ MPSoC | ZCU106 production silicon | xilinx-zcu106-v2023.2-10140544.bsp | This BSP contains: Hardware 1 (Extensible Platform): Vivado presets with Zynq UltraScale+ MPSoC PS block (DDR, UART, SD, QSPI, Ethernet, PCIe, DP, USB, SATA, etc.), VCU DDR4 Controller (PL DDR), VCU IP, clk_wiz, axi_interconnect, proc_sys_reset IPs. Hardware 2 (Extensible Platform): Same as above but with NEW PL DDR PART. Vitis: pfm.tcl packed for Vitis platform generation. Software: FSBL, PMUFW, TF-A, U-Boot, Linux, device-tree (includes open-amp, Xen), FPGA manager, vcu-control software, Ramdisk rootfs (minimal) and full rootfs. Pre-built Images: Ready to test bitstream, FSBL, PMUFW, TF-A, U-Boot, Linux, and rootfs. |
| 11 | Zynq UltraScale+ RFSoC | ZCU111 production silicon | xilinx-zcu111-v2023.2-10140544.bsp | This BSP contains: Hardware: Vivado presets with RFSoC PS block (DDR, UART, SD, QSPI, Ethernet, DP, USB, SATA, etc.) and rf_data_converters, sd_fec_dec, adc_sink, dac_source, axi_gpio, axi_intc IPs. Software: FSBL, PMUFW, TF-A, U-Boot, Linux, device-tree (includes open-amp, Xen), rfdc-drivers, Ramdisk rootfs (minimal) and full rootfs (RDFC example apps). Pre-built Images: Ready to test bitstream, FSBL, PMUFW, TF-A, U-Boot, Linux, and rootfs. |
| 12 | Zynq UltraScale+ RFSoC | ZCU216 | xilinx-zcu216-v2023.2-10140544.bsp | This BSP contains: Hardware: RFSoC PS block with production silicon and ADC_DDR_DMA, DAC_DDR_DMA CLOCKING blocks, axi_gpio, and IPs. Software: FSBL, PMUFW, TF-A, U-Boot, Linux, device-tree (includes open-amp, Xen), rfclk, rfdc-drivers, Ramdisk rootfs (minimal) and full rootfs (includes RFCLK and RDFC apps). Pre-built Images: Ready to test bitstream, FSBL, PMUFW, TF-A, U-Boot, Linux, and rootfs. |
| 13 | Zynq UltraScale+ RFSoC | ZCU208 | xilinx-zcu208-v2023.2-10140544.bsp | This BSP contains: Hardware: RFSoC PS block with production silicon and ADC_DDR_DMA, DAC_DDR_DMA CLOCKING blocks, axi_gpio, and IPs. Software: FSBL, PMUFW, TF-A, U-Boot, Linux, device-tree (includes open-amp, Xen), rfclk, rfdc-drivers, Ramdisk rootfs (minimal) and full rootfs (includes RFCLK and RDFC apps). Pre-built Images: Ready to test bitstream, FSBL, PMUFW, TF-A, U-Boot, Linux, and rootfs. |
| 14 | Zynq UltraScale+ RFSoC | ZCU208-SDFEC | xilinx-zcu208-sdfec-v2023.2-10140544.bsp | This BSP contains: Hardware: RFSoC PS block with production silicon, AXI stream, Monitor, SD-FEC, axi_gpio, AXI intc IPs. Software: FSBL, PMUFW, TF-A, U-Boot, Linux, device-tree (includes open-amp, Xen), rfclk, rfdc-drivers, Ramdisk rootfs (minimal) and full rootfs (RFCLK, RDFC, SDFEC apps). Pre-built Images: Ready to test bitstream, FSBL, PMUFW, TF-A, U-Boot, Linux, and rootfs. |
| 15 | Zynq UltraScale+ MPSoC | K26 Production SOM | xilinx-k26-som-v2023.2-10140544.bsp | This BSP contains: Hardware: Vivado presets with Zynq UltraScale PS block with SOM-specific peripherals and UART. Software: FSBL, PMUFW, TF-A, U-Boot, Linux, device-tree (includes open-amp, Xen), Ramdisk rootfs (minimal) and full rootfs (SOM, utilities, networking, Python, Jupyter packages). Pre-built Images: Ready to test bitstream, FSBL, PMUFW, TF-A, U-Boot, Linux, and rootfs. |
| 16 | Zynq UltraScale+ MPSoC | kv260-starterkit | xilinx-kv260-starterkit-v2023.2-10140544.bsp | Same as K26 SOM. Includes SOM peripherals, FSBL, PMUFW, TF-A, U-Boot, Linux, device-tree, and minimal/full rootfs (Python/Jupyter). |
| 17 | Zynq UltraScale+ MPSoC | kr260-starterkit | xilinx-kr260-starterkit-v2023.2-10140544.bsp | Same as K26 SOM. Includes SOM peripherals, FSBL, PMUFW, TF-A, U-Boot, Linux, device-tree, and minimal/full rootfs (Python/Jupyter). |
| 18 | Zynq UltraScale+ MPSoC | KD240 starter kit | xilinx-kd240-starterkit-v2023.2-10140544.bsp | Same as K26 SOM. Includes SOM peripherals, FSBL, PMUFW, TF-A, U-Boot, Linux, device-tree, and minimal/full rootfs (Python/Jupyter). |
| 19 | Zynq UltraScale+ MPSoC | K24C | xilinx-k24c-som-v2023.2-10140544.bsp | Same as K26 SOM. Includes SOM peripherals, FSBL, PMUFW, TF-A, U-Boot, Linux, device-tree, and minimal/full rootfs (Python/Jupyter). |
| 20 | Versal | VCK190 | xilinx-vck190-v2023.2-10140544.bsp | This BSP contains: Hardware (Extensible Platform): Versal CIPS PS block (DDR, UART, SD, QSPI, Ethernet, USB, etc.) with production silicon and AIE example in PL. Vitis Platform & AIE Project: Includes .xsa, xclbin, AIE app, and workspace. Software: PLM, PSMFW, TF-A, U-Boot, Linux, device-tree, minimal/full rootfs with TCL, xrt, zocl, python, Jupyter, and openamp-demo notebooks. Pre-built Images: PDI, PLM, PSMFW, TF-A, U-Boot, DTB, Linux, and rootfs (U-Boot/Linux/Xen). Note: Supports VCK190 Rev1 and RevA. |
| 21 | Versal | VCK190-OSPI | xilinx-vck190-ospi-v2023.2-10140544.bsp | Same as VCK190 but includes OSPI boot module. Supports both Rev1 and RevA. |
| 22 | Versal | VCK190-EMMC | xilinx-vck190-emmc-v2023.2-10140544.bsp | Same as VCK190 but includes eMMC boot module. Supports both Rev1 and RevA. |
| 23 | Versal | VMK180 | xilinx-vmk180-v2023.2-10140544.bsp | This BSP contains: Hardware: Versal CIPS PS block (DDR, UART, SD, QSPI, Ethernet, USB, etc.) with production silicon. Software: PLM, PSMFW, TF-A, U-Boot, Linux, device-tree, minimal/full rootfs with TCL and python. Pre-built Images: PDI, PLM, PSMFW, TF-A, U-Boot, DTB, Linux, and rootfs (U-Boot/Linux/Xen). Note: Supports Rev1 and RevA. |
| 24 | Versal | VMK180-EMMC | xilinx-vmk180-emmc-v2023.2-10140544.bsp | Same as VMK180 but includes eMMC boot module. Supports Rev1 and RevA. |
| 25 | Versal | VMK180-OSPI | xilinx-vmk180-ospi-v2023.2-10140544.bsp | Same as VMK180 but includes OSPI boot module. Supports Rev1 and RevA. |
| 26 | Versal | VPK120 | xilinx-vpk120-v2023.2-10140544.bsp | This BSP contains: Hardware: Versal CIPS PS block (LPDDR, UART, SD, QSPI, Ethernet, USB, etc.). Software: PLM, PSMFW, TF-A, U-Boot, Linux, device-tree, minimal/full rootfs. Pre-built Images: PDI, PLM, PSMFW, TF-A, U-Boot, DTB, Linux, and rootfs (U-Boot/Linux/Xen). |
| 27 | Versal | VPK180 | xilinx-vpk180-v2023.2-10140544.bsp | This BSP contains: Hardware: Versal CIPS PS block (LPDDR, UART, SD, QSPI, Ethernet, USB, etc.), Sysmon in secure mode, multi slave SLRs. Software: PLM, PSMFW, TF-A, U-Boot, Linux, device-tree, minimal/full rootfs. Pre-built Images: PDI, PLM, PSMFW, TF-A, U-Boot, DTB, Linux, and rootfs. |
| 28 | Versal | VHK158 | xilinx-vhk158-v2023.2-10140544.bsp | This BSP contains: Hardware: Versal CIPS PS block with PS (JTAG, HBM, SD, OSPI, eMMC boot modes) and Sysmon enabled. Software: PLM, PSMFW, TF-A, U-Boot, Linux, device-tree, minimal/full rootfs. Pre-built Images: PDI, PLM, PSMFW, TF-A, U-Boot, DTB, Linux, and rootfs (U-Boot/Linux/Xen). Note: Boots from HBM by default. |
Unified Images supported for the 2023.1 PetaLinux Release
This table contains supported unified images for Zynq UltraScale+ MPSoC/RFSoC and Versal devices which are available on the Embedded Development download page
| Platform | File Name | Description |
|---|---|---|
| Zynq UltraScale+ MPSoC | xilinx-zynqmp-common-v2023.2_10140544.tar.gz | This tar contains: bl31.elf, boot.scr, Image, rootfs.ext4, rootfs.manifest, rootfs.tar.gz, sdk.sh, u-boot.elf README.txt: Describes the files and provides usage information. |
| Versal | xilinx-versal-common-v2023.2_10140544.tar.gz | This tar contains: bl31.elf, boot.scr, Image, rootfs.ext4, rootfs.manifest, rootfs.tar.gz, sdk.sh, u-boot.elf README.txt: Describes the files and provides usage information. |
PetaLinux 2023.2 contains the following build collateral:
Commits Information
The following table contains Repo, Tag, and commit ID information for the 2023.2 Release.
Yocto Components
| Component | Branch | Commit ID | URL | GitHub Tag |
|---|---|---|---|---|
| yocto-scripts | rel-v2023.2 | ee144c37311221081756e3194ea7c5fae79871f6 | https://github.com/Xilinx/yocto-scripts/tree/rel-v2023.2 | xlnx-rel-v2023.2 |
| yocto-manifests | rel-v2023.2 | 951497869cc05da1733ee79eedbc62a58147d34f | https://github.com/Xilinx/yocto-manifests/tree/rel-v2023.2 | xlnx-rel-v2023.2 |
| poky | rel-v2023.2 | c572c1a1e0ea573e64a2864d8893800104d36a67 | https://github.com/Xilinx/poky/tree/rel-v2023.2 | xlnx-rel-v2023.2 |
| meta-xilinx-tsn | rel-v2023.2 | 54d9d3801979451fc413d6dc6c09525c3fe9bb2a | https://github.com/Xilinx/meta-xilinx-tsn/tree/rel-v2023.2 | xlnx-rel-v2023.2 |
| meta-xilinx-tools | rel-v2023.2 | e192e0d84482828bc9b2bf24214029ddddc08cc8 | https://github.com/Xilinx/meta-xilinx-tools/tree/rel-v2023.2 | xlnx-rel-v2023.2 |
| meta-xilinx | rel-v2023.2 | 05911e19d85fd98c42054238392afe95a5125265 | https://github.com/Xilinx/meta-xilinx/tree/rel-v2023.2 | xlnx-rel-v2023.2 |
| meta-virtualization | rel-v2023.2 | 3eafe79389cb0a58a9c7fbeebcf215aad8903910 | https://github.com/Xilinx/meta-virtualization/tree/rel-v2023.2 | xlnx-rel-v2023.2 |
| meta-system-controller | rel-v2023.2 | 1023dd58807522cab7f068d161ffce5788a7efa5 | https://github.com/Xilinx/meta-system-controller/tree/rel-v2023.2 | xlnx-rel-v2023.2 |
| meta-security | rel-v2023.2 | a4562b19126ab655869da6db40e8eff49f84c490 | https://github.com/Xilinx/meta-security/tree/rel-v2023.2 | xlnx-rel-v2023.2 |
| meta-ros | rel-v2023.2 | b937872e702d325e83b7b466783a5702ecec0f60 | https://github.com/Xilinx/meta-ros/tree/rel-v2023.2 | xlnx-rel-v2023.2 |
| meta-qt5 | rel-v2023.2 | 1a917695e439d602ec85e1db4e0478533cfbfaa8 | https://github.com/Xilinx/meta-qt5/tree/rel-v2023.2 | xlnx-rel-v2023.2 |
| meta-petalinux | rel-v2023.2 | ee7b7b28d5c31a805a56d6eab22aa02d8f5ca416 | https://github.com/Xilinx/meta-petalinux/tree/rel-v2023.2 | xlnx-rel-v2023.2 |
| meta-openembedded | rel-v2023.2 | 4c7ef6548bc26754243547b55d6d5844563e39a2 | https://github.com/Xilinx/meta-openembedded/tree/rel-v2023.2 | xlnx-rel-v2023.2 |
| meta-openamp | rel-v2023.2 | aa1edd482265f0a29f3c269590da54141ceb228a | https://github.com/Xilinx/meta-openamp/tree/rel-v2023.2 | xlnx-rel-v2023.2 |
| meta-mingw | rel-v2023.2 | b0067202db8573df3d23d199f82987cebe1bee2c | https://github.com/Xilinx/meta-mingw/tree/rel-v2023.2 | xlnx-rel-v2023.2 |
| meta-kria | rel-v2023.2 | 676641578241eec02b33a750414145bb5afbebec | https://github.com/Xilinx/meta-kria/tree/rel-v2023.2 | xlnx-rel-v2023.2 |
| meta-jupyter | rel-v2023.2 | ad54a81a36e2734284709cee118c1944e6d510e7 | https://github.com/Xilinx/meta-jupyter/tree/rel-v2023.2 | xlnx-rel-v2023.2 |
| meta-aws | rel-v2023.2 | 0b47914b4465257295dbf13f54f4026c5830cbbe | https://github.com/Xilinx/meta-aws/tree/rel-v2023.2 | xlnx-rel-v2023.2 |
SSW Components
| Component | Branch | Commit ID | URL | GitHub Tag |
|---|---|---|---|---|
| gen-machine-conf | xlnx_rel_v2023.2 | 911941fc094dc0073c2f01a2b94de3cc6e993fe3 | github.com/Xilinx/gen-machine-conf | xilinx_v2023.2 |
| tsn-utils | xlnx_rel_v2023.2 | f62d79efc1a74cde8e755ec85ca26702c4fe6fbf | github.com/Xilinx/tsn-utils | xilinx_v2023.2 |
| tsn-examples | xlnx_rel_v2023.2 | 5959b0819c0ed72444b78984d2f98077c45d54f3 | github.com/Xilinx/tsn-talker-listener | xilinx_v2023.2 |
| ai-engine-driver | xlnx_rel_v2023.2 | 84debe5d22c144fb09269b8410df4cb8a6aa3b2a | github.com/Xilinx/aie-rt | xilinx_v2023.2 |
| board-id-data | xlnx_rel_v2023.2 | 57dbb34fd92d8e34c5118a28ff2bb276f0c5ed5b | github.com/Xilinx/xlnx-board-id-data | xilinx_v2023.2 |
| vitis-ai-library | master | b7953a2a9f60e23efdfced5c186328dd1449665c | github.com/Xilinx/Vitis-AI | xilinx_v2023.2 |
| labtool-jtag-support | xlnx_rel_v2023.2 | 3c2b6d4576750acb77b562701d71602308d15ea3 | github.com/Xilinx/jupyter-pat | xilinx_v2023.2 |
| ultra96-startup-pages | xlnx_rel_v2023.2 | 6a527f77fd865c2edd4463a9798486e7d34a43bf | github.com/Xilinx/ultra96-startup-pages | xilinx_v2023.2 |
| pm-notebooks | xlnx_rel_v2023.2 | c502be361b6857e21ab903f31c9ead69e3a0d9ba | github.com/Xilinx/platform-management-notebooks | xilinx_v2023.2 |
| image-update | xlnx_rel_v2023.2 | c1117cad92d967d7adca7fd2ba655808f4687516 | github.com/Xilinx/linux-image_update | xilinx_v2023.2 |
| xlnx-platformstats | xlnx_rel_v2023.2 | 9b4327f86b238ba0ba07bba4a0186766c9a803ac | github.com/Xilinx/xlnx_platformstats | xilinx_v2023.2 |
| ddr-qos | xlnx_rel_v2023.2 | 6d1304e5b826cea21da02bd7ca04512176f665ff | github.com/Xilinx/ddr-qos | xilinx_v2023.2 |
| axi-qos | xlnx_rel_v2023.2 | 2fd1b627c83778d03b1a91c99990d3714d261bbd | github.com/Xilinx/axi-qos | xilinx_v2023.2 |
| kria-dashboard | xlnx_rel_v2023.2 | 7b24d185268d1a4d310b21367beb361001e4c7a3 | github.com/Xilinx/kria-dashboard | xilinx_v2023.2 |
| xmutil | xlnx_rel_v2023.2 | 505bbd4c2b29f0f93ef76185f0f0d4083535bd30 | github.com/Xilinx/xmutil | xilinx_v2023.2 |
| dfx-mgr | xlnx_rel_v2023.2 | 4dbd33accb043bd92ecbec2a3507f85a22045c51 | github.com/Xilinx/dfx-mgr | xilinx_v2023.2 |
| image-builder | xlnx_rel_v2023.2 | 297a48f8635713a14469a92d49f7e292554dedc9 | github.com/Xilinx/imagebuilder | xilinx_v2023.2 |
| sdfec | xlnx_rel_v2023.2 | 91a9fc9b6758959f34fef92dbfd3bb3556181f3e | github.com/Xilinx/linux-examples | xilinx_v2023.2 |
| libdfx | xlnx_rel_v2023.2 | 52c1d83c72a2b2e85d256411a199ed1baed12ae1 | github.com/Xilinx/libdfx | xilinx_v2023.2 |
| pmtool | xlnx_rel_v2023.2 | 8aaad5c95c67974df8a1c590d1afb3f6ad39fa31 | github.com/Xilinx/system-controller-pmtool | xilinx_v2023.2 |
| scweb | xlnx_rel_v2023.2 | 13be9f285f753f07fbca67f07255422183bb468b | github.com/Xilinx/system-controller-web | xilinx_v2023.2 |
| bootgen | xlnx_rel_v2023.2 | 8e6702bb5064b806e45028486de7376962470a36 | github.com/Xilinx/bootgen | xilinx_v2023.2 |
| gstreamer1.0 | xlnx-rebase-v1.20.5 | d7a39e850385ed5d5838839bdcc67d6cb44c2188 | github.com/Xilinx/gstreamer | xlnx-rebase-v1.20.5_2023.2 |
| system-controller-app | xlnx_rel_v2023.2 | 8bbff709becc9b15a9c56f82a10aa68b77c3a895 | github.com/Xilinx/system-controller-app | xilinx_v2023.2 |
| xrt | 2023.2 | 2865a62b6a417dea523d2d5646154aa94a2cbc28 | github.com/Xilinx/XRT | xilinx_v2023.2 |
| gstreamer-vdu-notebooks | xlnx_rel_v2023.2 | ef7a7236144a04977cb5bb800d6d7cf319e52b58 | github.com/Xilinx/multimedia-notebooks | xilinx_v2023.2 |
| kernel-module-dp | xlnx_rel_v2023.2 | 5b0969ac09f301c33bccc140c8f60e832f5cf222 | github.com/xilinx/dp-modules | xilinx_v2023.2 |
| kernel-module-hdmi | xlnx_rel_v2023.2 | 82209b0021a7b5d7ef71a859eed4bafeb541ed08 | github.com/Xilinx/hdmi-modules | xilinx_v2023.2 |
| vdu-firmware | xlnx_rel_v2023.2 | 731897772730178f6a4e77eedeb4fb53faa1ab4d | github.com/Xilinx/vdu-firmware | xilinx_v2023.2 |
| libvdu-ctrlsw | xlnx_rel_v2023.2 | 1beb8f247d01b1a728faea36ce8f7847c895482f | github.com/Xilinx/vdu-ctrl-sw | xilinx_v2023.2 |
| kernel-module-vdu | xlnx_rel_v2023.2 | 4d5134f54006f904f0b28f00e05dd3febd5fcfd3 | github.com/Xilinx/vdu-modules | xilinx_v2023.2 |
| libvdu-omxil | xlnx_rel_v2023.2 | 811eefac953fd5e098c69cada97a0dd35f5e9015 | github.com/Xilinx/vdu-omx-il | xilinx_v2023.2 |
| libomxil-xlnx | xlnx_rel_v2023.2 | 3a04b5adc661a0eced626c1373dbbfe699ae6fe0 | github.com/Xilinx/vcu-omx-il | xilinx_v2023.2 |
| kernel-module-vcu | xlnx_rel_v2023.2 | 689c8d823b383e2a8a5249be49de627f866cfaf2 | github.com/Xilinx/vcu-modules | xilinx_v2023.2 |
| libvcu-xlnx | xlnx_rel_v2023.2 | 84b0856cad7844d69f57ac4d9447c20930875475 | github.com/Xilinx/vcu-ctrl-sw | xilinx_v2023.2 |
| vcu-firmware | xlnx_rel_v2023.2 | f4ab98d26aa3e244a487f518f5a76071137c8402 | github.com/Xilinx/vcu-firmware | xilinx_v2023.2 |
| open-amp-xlnx | xlnx_rel_v2023.2 | 73a546f2b5faffe71680b1e5389f3328be60773f | github.com/Xilinx/open-amp | xilinx_v2023.2 |
| libmetal-xlnx | xlnx_rel_v2023.2 | 00fd771adc7adaed664ed6c5bc3d48d25856fe5c | github.com/Xilinx/libmetal | xilinx_v2023.2 |
| libmali-xlnx | xlnx_rel_v2023.2 | b3a772aad859cdadc8513b11c3e995546c20e75e | github.com/Xilinx/mali-userspace-binaries | xilinx_v2023.2 |
| runx-xlnx | xlnx_rebase_1.1 | 0c7edb3453398d7a0c594ce026c9c1e93c2541cc | github.com/Xilinx/runx | xlnx_rebase_1.1_2023.2 |
| xen | xlnx_rebase_4.17 | 970ab2e80a80cd5de7a36015657ed5576ddc7cb3 | github.com/Xilinx/xen | xlnx_rebase_4.17_2023.2 |
| qemu-xilinx | xlnx_rel_v2023.2 | 23b643ba1683a47ef49447a45643fe2172d6f8ca | github.com/Xilinx/qemu | xilinx_v2023.2 |
| qemu-devicetrees | xlnx_rel_v2023.2 | d1013382d9a5ef816cd020e7840813b7a2d65c51 | github.com/Xilinx/qemu-devicetrees | xilinx_v2023.2 |
| device-tree | xlnx_rel_v2023.2 | 1a5881d00406fa4f68eee63064799b8e5b28a41a | github.com/Xilinx/device-tree-xlnx | xilinx_v2023.2 |
| fsbl-firmware | xlnx_rel_v2023.2 | c9a0ee31b2a14cbcfcb56ca369037319b4ad4847 | github.com/Xilinx/embeddedsw | xilinx_v2023.2 |
| arm-trusted-firmware | xlnx_rebase_v2.8 | 6be857cb66300fb21e3f61308e4197911c8ac30d | github.com/Xilinx/arm-trusted-firmware | xlnx_rebase_v2.8_2023.2 |
| u-boot-xlnx | xlnx_rebase_v2023.01 | 0fc19cad5a07a09958443e7a5b6f11e420ef195c | github.com/Xilinx/u-boot-xlnx | xlnx_rebase_v2023.01_2023.2 |
| linux-xlnx | xlnx_rebase_v6.1_LTS | a19da02cf5b44420ec6afb1eef348c21d9e8cda2 | github.com/Xilinx/linux-xlnx | xlnx_rebase_v6.1_LTS_2023.2 |
VCU New Features
- None
GPU New Features
- None
Open Source components New Features
- See here for the list of features
VCU Bug Fixes
| Component Name | Platform | Bug Description |
|---|---|---|
| SSW_VCU | Zynq UltraScale+ MPSoC | - Performance issues - Concealment and resilience fixes - Fixed: kmssink fails to negotiate with pixel-aspect-ratio other than “1/1” - Fixed: kmssink memory leak when hold-extra-sample flag is set - Populated video alignment info in GstVideometa of kmsbuffer |
GPU Bug Fixes
- Using Weston 9.0.0 on selecting Mali driver and Weston 10.0.2 for LIMA driver.
Known Issues for the 2023.2 release
| Linux/Baremetal | Components | Platform/SoC Supported | Work-around Article Description and Link | To be fixed version |
|---|---|---|---|---|
| Linux | PetaLinux | Kria SOM | 000035701 - PetaLinux 2023.2 Kria SOM: RS485 functionality is not working with 2023.2 PetaLinux for the KD240 BSP | 2024.1 |
| Linux | PetaLinux | Versal | Default HBM JTAG boot expects 0x20000000 as boot.scr address | 2024.1 |
| Linux | PetaLinux | Versal | Default boot script offset is 0x7F80000 | 2024.1 |
| Linux | SSW_VCU | Zynq UltraScale+ MPSoC | Randomly observed very low fps drops in llp1/llp2 XV20 streaming use-cases | 2024.1 |
| Linux | SSW_VCU | Zynq UltraScale+ MPSoC | omxh264enc0: The stream is in the wrong format | 2024.1 |
| Linux | SSW_VCU | Zynq UltraScale+ MPSoC | VCU - MCU error when running a gstreamer pipeline with xavc profile | 2024.1 |
| Linux | SSW_DTG | All | Call traces while unloading PL using fpgautil with CSOC based design | 2024.1 |
| Linux | PetaLinux | Aarch64 | petalinux esdk upgrade warnings | 2024.1 |
| Linux | SSW_U-boot | Zynq | QSPI lock-unlock tests are failing for micron flashes | 2024.1 |
| Linux | PetaLinux | Zynq | Observed Warnings in builds with PetaLinux 2023.2 | 2024.1 |
| Baremetal | SSW_Drivers | Virtex 7 | VC707: Flash Read/Write Test Fails | 2024.1 |
PetaLinux_2023.2_OS_Package_List
Linux Distribution OS details:
Desktop (From Everything.ISO): Development and Creative workstation.
- Ubuntu 18.04.1 LTS, 18.04.2 LTS, 18.04.3 LTS, 18.04.4 LTS, 18.04.5 LTS, 18.04.6 LTS, 20.04.2 LTS, 20.04.3 LTS, 20.04.4 LTS, 20.04.5 LTS, 20.04.6 LTS, 22.04 LTS, 22.04.1 LTS and Ubuntu 22.04.2 LTS Desktop
- Ubuntu 18.04.1 LTS , 18.04.2 LTS, 18.04.3 LTS, 18.04.4 LTS, 18.04.5 LTS, 18.04.6 LTS, 20.04.2 LTS, 20.04.3 LTS, 20.04.4 LTS, 20.04.5 LTS , 20.04.6 LTS, 22.04 LTS, 22.04.1 LTS and Ubuntu 22.04.2 LTS Server
- OPEN SUSE LEAP 15.3 and OPEN SUSE LEAP 15.4 Desktop (From Everything.ISO): Development and Creative workstation
- OPEN SUSE LEAP 15.3 and OPEN SUSE LEAP 15.4 (From Everything.ISO): Infrastructure server
- Almalinux 8.7 and Almalinux 9.1 Desktop (From Everything.ISO): Development and Creative workstation
- Almalinux 8.7 and Almalinux 9.1 (From Everything.ISO): Infrastructure server
Note:
- Empty packages are not installed means assuming these are default from Linux Distribution.
- For Almalinux you need to installGitPython and jinja2 using pip3 commands as mentioned below.
Host GCC Version Upgrade:
From 2021.1 release, the gcc version should be greater than 6. Using lower versions of gcc causes build issues. You can also enable the Enable buildtools extended option from petalinux -config → Yocto settings, which uses the pre-compiled gcc binaries from the PetaLinux tool.
Quick Installation steps for packages
Ubuntu Desktop/Server 64-bit
sudo apt-get install iproute2 gawk python3 python build-essential gcc git make net-tools libncurses5-dev tftpd zlib1g-dev libssl-dev flex bison libselinux1 gnupg wget git-core diffstat chrpath socat xterm autoconf libtool tar unzip texinfo zlib1g-dev gcc-multilib automake zlib1g:i386 screen pax gzip cpio python3-pip python3-pexpect xz-utils debianutils iputils-ping python3-git python3-jinja2 libegl1-mesa libsdl1.2-dev pylint
Alma Linux Desktop/Server 64-bit
sudo dnf install gawk make wget tar bzip2 gzip python3 unzip perl patch diffutils diffstat git cpp gcc gcc-c++ glibc-devel texinfo chrpath ccache socat perl-Data-Dumper perl-Text-ParseWords perl-Thread-Queue python3-pip python3-GitPython python3-jinja2 python3-pexpect xz which SDL-devel xterm rpcgen mesa-libGL-devel zstd lz4
pip3 install sphinx sphinx_rtd_theme pyyaml
OPEN SUSE LEAP Desktop/Server 64-bit
sudo zypper install python gcc gcc-c++ git chrpath make wget python-xml diffstat makeinfo python-curses patch socat python3 python3-curses tar python3-pip python3-pexpect xz which python3-Jinja2 Mesa-libEGL1 libSDL-devel xterm rpcgen Mesa-dri-devel zstd lz4
pip3 install GitPython
Tool/Library Versions
Ubuntu
| Tool/Library | Ubuntu Desktop /Server 18.04.1 (64-bit) | Ubuntu Desktop /Server 18.04.2 (64-bit) | Ubuntu Desktop /Server 18.04.3 (64-bit) | Ubuntu Desktop /Server 18.04.4 (64-bit) | Ubuntu Desktop /Server 18.04.5 (64-bit) | Ubuntu Desktop /Server 18.04.6 (64-bit) | Ubuntu Desktop /Server 20.04.2(64-bit) | Ubuntu Desktop /Server 20.04.3(64-bit) | Ubuntu Desktop /Server 20.04.4(64-bit) | Ubuntu Desktop /Server 20.04.5(64-bit) | Ubuntu Desktop /Server 20.04.6(64-bit) | Ubuntu Desktop /Server 22.04(64-bit) | Ubuntu Desktop /Server 22.04.1(64-bit) | Ubuntu Desktop /Server 22.04.2(64-bit) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ip (iproute) | iproute-4.15.0-2ubuntu1 | iproute2-4.15.0-2ubuntu1 | iproute-4.15.0-2ubuntu1 | iproute2-4.15.0-2ubuntu1.1 | iproute2-4.15.0-2ubuntu1.3 | iproute2-4.15.0-2ubuntu1.3 | iproute2 -5.5.0-1ubuntu1 | iproute2 -5.5.0-1ubuntu1 | iproute2-5.5.0-1ubuntu1 | iproute2-5.5.0-1ubuntu1 | iproute2-5.5.0-1ubuntu1 | iproute2-5.15.0-1ubuntu2 | iproute2-5.15.0-1ubuntu2 | iproute2-5.15.0-1ubuntu2 |
| gawk | gawk-1:4.1.4+dfsg-1build1 | gawk-1:4.1.4+dfsg-1build1 | gawk-1:4.1.4+dfsg-1build1 | gawk-1:4.1.4+dfsg-1build1 | gawk-1:4.1.4+dfsg-1build1 | gawk-1:4.1.4+dfsg-1build1 | gawk-1:5.0.1+dfsg-1 | gawk-1:5.0.1+dfsg-1 | gawk-1:5.0.1+dfsg-1 | gawk-1:5.0.1+dfsg-1 | gawk-1:5.0.1+dfsg-1 | gawk-1:5.1.0-1build3 | gawk-1:5.1.0-1build3 | gawk-1:5.1.0-1build3 |
| gcc | gcc-7.5.0-3ubuntu1~18.04 | gcc-7.5.0-3ubuntu1~18.04 | gcc-7.5.0-3ubuntu1~18.04 | gcc-7.5.0-3ubuntu1~18.04 | gcc-7.5.0-3ubuntu1~18.04 | gcc-7.5.0-3ubuntu1~18.04 | gcc-4:9.3.0-1ubuntu2 | gcc-4:9.3.0-1ubuntu2 | gcc-4:9.3.0-1ubuntu2 | gcc-4:9.3.0-1ubuntu2 | gcc-4:11.2.0-1ubuntu1 | gcc-4:11.2.0-1ubuntu1 | gcc-4:11.2.0-1ubuntu1 | |
| netstat (net-tools) | net-tools-1.60+git20161116.90da8a0-1ubuntu1 | net-tools-1.60+git20161116.90da8a0-1ubuntu1 | net-tools-1.60+git20161116.90da8a0-1ubuntu1 | net-tools- 1.60+git20161116.90da8a0-1ubuntu1 | net-tools-1.60+git20161116.90da8a0-1ubuntu1 | net-tools-1.60+git20161116.90da8a0-1ubuntu1 | net-tools-1.60+git20180626.aebd88e-1ubuntu1 | net-tools-1.60+git20180626.aebd88e-1ubuntu1 | net-tools-1.60+git20180626.aebd88e-1ubuntu1 | net-tools-1.60+git20180626.aebd88e-1ubuntu1 | net-tools-1.60+git20180626.aebd88e-1ubuntu1 | net-tools-1.60+git20181103.0eebece-1ubuntu5 | net-tools-1.60+git20181103.0eebece-1ubuntu5 | net-tools-1.60+git20181103.0eebece-1ubuntu5 |
| ncurses-devel(libncurses5-dev) | ncurses-devel-6.1-1ubuntu1.18.04 | ncurses-devel-6.1-1ubuntu1.18.04 | ncurses-devel-6.1-1ubuntu1.18.04 | ncurses-devel-6.1-1ubuntu1.18.04 | ncurses-devel-6.1-1ubuntu1.18.04 | ncurses-devel-6.1-1ubuntu1.18.04 | ncurses-devel-6.2-0ubuntu2 | ncurses-devel-6.2-0ubuntu2 | ncurses-devel-6.2-0ubuntu2 | ncurses-devel-6.2-0ubuntu2 | ncurses-devel-6.2-0ubuntu2 | ncurses-devel-6.3-2 | ncurses-devel-6.3-2 | ncurses-devel-6.3-2 |
| zlib-devel(also,install 32-bit of this version) | zlib-devel-1:1.2.11.dfsg-0ubuntu2 | zlib-devel-1:1.2.11.dfsg-0ubuntu2 | zlib-devel-1:1.2.11.dfsg-0ubuntu2 | zlib-devel-1:1.2.11.dfsg-0ubuntu2 | zlib-devel-1:1.2.11.dfsg-0ubuntu2 | zlib-devel-1:1.2.11.dfsg-0ubuntu2 | zlib-devel-1:1.2.11.dfsg-2ubuntu1.3 | zlib-devel-1:1.2.11.dfsg-2ubuntu1.2 | NA | NA | NA | NA | NA | NA |
| openssl-devel | openssl - 17.5.0-1ubuntu1 | openssl-1.1.1-1ubuntu2.1~18.04.4 | openssl - 17.5.0-1ubuntu1 | openssl -1.1.1-1ubuntu2.1~18.04.6 | openssl -1.1.1-1ubuntu2.1~18.04.10 | openssl - 1.1.1-1ubuntu2.1~18.04.14 | openssl - 1.1.1f-1ubuntu2.3~18.04.14 | openssl-1.1.1f-1ubuntu2.3 | openssl -1.1.1f-1ubuntu2.16 | openssl -1.1.1f-1ubuntu2.16 | openssl -1.1.1f-1ubuntu2.16 | openssl-3.0.2-0ubuntu1 | openssl -3.0.2-0ubuntu1.6 | openssl - 3.0.2-0ubuntu1.6 |
| flex | flex-2.6.4-6 | flex-2.6.4-6 | flex-2.6.4-6 | flex-2.6.4-6 | flex-2.6.4-6 | flex-2.6.4-6 | flex-2.6.4-6.2 | flex-2.6.4-6.2 | NA | NA | NA | NA | NA | NA |
| bison | bison-2:3.0.4.dfsg-1build1 | bison-2:3.0.4.dfsg-1build1 | bison-2:3.0.4.dfsg-1build1 | bison-2:3.0.4.dfsg-1build1 | bison-2:3.0.4.dfsg-1build2 | bison-2:3.0.4.dfsg-1build2 | bison-2:3.0.4.dfsg-1build5 | bison-2:3.0.4.dfsg-1build5 | NA | NA | NA | NA | NA | NA |
| libselinux | linselinux1-2.7-2build2 | linselinux1-2.7-2build2 | linselinux1-2.7-2build2 | linselinux1-2.7-2build2 | linselinux1-2.7-2build2 | linselinux1-2.7-2build2 | linselinux1-3.0-1build2 | linselinux1-3.0-1build2 | linselinux1-3.0-1build2 | linselinux1-3.0-1build2 | linselinux1-3.0-1build2 | linselinux1-3.3-1build2 | linselinux1-3.3-1build2 | NA |
| xterm | xterm-330-1ubuntu2.2 | xterm-330-1ubuntu2.2 | xterm-330-1ubuntu2.2 | xterm-330-1ubuntu2.2 | xterm-330-1ubuntu2.2 | xterm-330-1ubuntu2.2 | xterm-353-1ubuntu1.20.04.2 | xterm-353-1ubuntu1.20.04.2 | xterm-353-1ubuntu1.20.04.2 | xterm-353-1ubuntu1.20.04.2 | xterm-353-1ubuntu1.20.04.2 | xterm-372-1ubuntu1 | xterm-372-1ubuntu1 | xterm-372-1ubuntu1 |
| autoconf | autoconf-2.69-11 | autoconf-2.69-11 | autoconf-2.69-11 | autoconf-2.69-11 | autoconf-2.69-11 | autoconf-2.69-11 | autoconf-2.69-11.1 | autoconf-2.69-11.1 | autoconf-2.69-11.1 | autoconf-2.69-11.1 | autoconf-2.69-11.1 | autoconf-2.71-2 | autoconf-2.71-2 | autoconf-2.71-2 |
| libtool | libtool-2.4.6-2 | libtool-2.4.6-2 | libtool-2.4.6-2 | libtool-2.4.6-2 | libtool-2.4.6-2 | libtool-2.4.6-2 | libtool-2.4.6-14 | libtool-2.4.6-14 | libtool-2.4.6-14 | libtool-2.4.6-14 | libtool-2.4.6-14 | libtool-2.4.6-15build2 | libtool-2.4.6-15build2 | libtool-2.4.6-15build2 |
| texinfo | texinfo-6.5.0.dfsg.1-2 | texinfo-6.5.0.dfsg.1-2 | texinfo-6.5.0.dfsg.1-2 | texinfo -6.5.0.dfsg.1-2 | texinfo-6.5.0.dfsg.1-2 | texinfo-6.5.0.dfsg.1-2 | texinfo-6.7.0.dfsg.2-5 | texinfo-6.7.0.dfsg.2-5 | texinfo-6.7.0.dfsg.2-5 | texinfo-6.7.0.dfsg.2-5 | texinfo-6.7.0.dfsg.2-5 | texinfo -6.8-4build1 | texinfo-6.8-4build1 | texinfo-6.8-4build1 |
| zlib1g-dev | zlib1g-dev1:1:1.2.11.dfsg-0ubuntu2.2 | zlib1g-dev1:1.2.11.dfsg-0ubuntu2.2 | zlib1g-dev1:1.2.11.dfsg-0ubuntu2.2 | zlib1g-dev-1:1.2.11.dfsg-0ubuntu2.2 | zlib1g-dev1:1.2.11.dfsg-0ubuntu2.2 | zlib1g-1:1.2.11.dfsg-0ubuntu2.2 | zlib1g-dev-1:1.2.11.dfsg-2ubuntu1.5 | zlib1g-dev1:1:1.2.11.dfsg-2ubuntu1.5 | zlib1g-dev:amd64-1:1.2.11.dfsg-2ubuntu1.5 | zlib1g-dev:amd64 -1:1.2.11.dfsg-2ubuntu1.5 | zlib1g-dev:1:1.2.11.dfsg-2ubuntu1.5 | zlib1g-dev-1:1.2.11.dfsg-2ubuntu9.2 | zlib1g-dev:amd64 -1:1.2.11.dfsg-2ubuntu9.2 | zlib1g-1:1.2.11.dfsg-2ubuntu9.2 |
| gcc-multilib | gcc-multilib-4:7.4.0-1ubuntu2.3 | gcc-multilib-4:7.4.0-1ubuntu2.3 | gcc-multilib-4:7.4.0-1ubuntu2.3 | gcc-multilib-4:7.4.0-1ubuntu2.3 | gcc-multilib-4:7.4.0-1ubuntu2.3 | gcc-multilib-4:7.4.0-1ubuntu2.3 | gcc-multilib-4:9.3.0-1ubuntu2 | gcc-multilib-4:9.3.0-1ubuntu2 | gcc-multilib-4:9.3.0-1ubuntu2 | gcc-multilib-4:9.3.0-1ubuntu2 | gcc-multilib-4:9.3.0-1ubuntu2 | gcc-multilib -4:11.2.0-1ubuntu1 | gcc-multilib 4:11.2.0-1ubuntu1 | gcc-multilib -4:11.2.0-1ubuntu1 |
| build-essential | build-essential-12.4ubuntu1 | build-essential-12.4ubuntu1 | build-essential-12.4ubuntu1 | build-essential-12.4ubuntu1 | build-essential-12.4ubuntu1 | build-essential-12.4ubuntu1 | build-essential-12.8ubuntu1.1 | build-essential-12.8ubuntu1.1 | build-essential-12.8ubuntu1.1 | build-essential-12.8ubuntu1.1 | build-essential-12.8ubuntu1.1 | build-essential-12.9ubuntu3 | build-essential 12.9ubuntu3 | build-essential 12.9ubuntu3 |
| SDL-devel | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA |
| glibc-devel | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA |
| glib2-devel | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA |
| automake | automake-1:1.15.1-3ubuntu2 | automake-1:1.15.1-3ubuntu2 | automake-1:1.15.1-3ubuntu2 | automake-1:1.15.1-3ubuntu2 | automake-1:1.15.1-3ubuntu2 | automake-1:1.15.1-3ubuntu2 | automake -2.69-11.1-ubuntu6 | automake -2.69-11.1 | automake -1:1.16.1-4ubuntu6 | automake -1:1.16.1-4ubuntu6 | automake -2.69-11.1 | automake-1:1.16.5-1.3 | automake-1:1.16.5-1.3 | automake-1:1.16.5-1.3 |
| screen | screen-4.6.2-1ubuntu1 | screen-4.6.2-1ubuntu1 | screen - 4.6.2-1ubuntu1.1 | screen -4.6.2-1ubuntu1 | screen -4.6.2-1ubuntu1.1 | screen -4.6.2-1ubuntu1.1 | screen - 4.8.0-1ubuntu0.1 | screen -4.8.0-1ubuntu0.1 | screen -4.8.0-1ubuntu0.1 | screen -4.8.0-1ubuntu0.1 | screen -4.8.0-1ubuntu0.1 | screen -4.9.0-1 | screen -4.9.0-1 | screen-4.9.0-1 |
| pax | pax-1:20171021-3 | pax-1:20171021-3 | pax-1:20171021-2 | pax-1:20171021-3 | pax-1:20171021-3 | pax-1:20171021-3 | pax-1:20171021-6 | pax-1:20171021-6 | NA | NA | NA | NA | NA | NA |
| libstdc++ | libstdc++-7.5.0-3ubuntu1~18.04 | libstdc++-7.5.0-3ubuntu1~18.04 | libstdc++-7.5.0-3ubuntu1~18.04 | libstdc++-7.5.0-3ubuntu1~18.04 | libstdc++-7.5.0-3ubuntu1~18.04 | libstdc++-8.4.0-1ubuntu1~18.04 | libstdc++- 10.3.0-1ubuntu1~20.04 | libstdc++-10.3.0-1ubuntu1~20.04 | libstdc++-10.3.0-1ubuntu1~20.04 | libstdc++-10.3.0-1ubuntu1~20.04 | libstdc++-10.3.0-1ubuntu1~20.04 | libstdc++-11-dev:12.1.0-2ubuntu1~22.04 | libstdc++-12.1.0-2ubuntu1~22.04 | libstdc++-11-12.1.0-2ubuntu1~22.04 |
| g++ (gcc-c++) | g++ -4:7.4.0-1ubuntu2.3 | g++ -4:7.4.0-1ubuntu2.3 | g++ -4:7.4.0-1ubuntu2.3 | g++ -4:7.4.0-1ubuntu2.3 | g++ -4:7.4.0-1ubuntu2.3 | g++ -4:7.4.0-1ubuntu2.3 | g++ -4:9.3.0-1ubuntu2 | g++ -4:9.3.0-1ubuntu2 | g++ -4:9.3.0-1ubuntu2 | g++ -4:9.3.0-1ubuntu2 | g++ -4:9.3.0-1ubuntu2 | g++-4:11.2.0-1ubuntu1 | g++ -4:11.2.0-1ubuntu1 | g++ -4:11.2.0-1ubuntu1 |
| python3-pip | python3-pip (9.0.1-2) | python3-pip (9.0.1-2) | python3-pip (9.0.1-2) | python3-pip (9.0.1-2) | python3-pip (9.0.1-2) | python3-pip (9.0.1-2) | python3-pip (9.0.1-2) | python3-pip (9.0.1-2) | NA | NA | NA | NA | NA | NA |
| perl-dat-dumper | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA |
| perl-thread-queue | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA |
| perl-Text-ParseWords | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA |
| xz(xz-utils) | xz-utils (5.2.2-1.3) | xz-utils (5.2.2-1.3) | xz-utils - 5.2.2-1.3ubuntu0.1 | xz-utils (5.2.2-1.3) | xz-utils -5.2.2-1.3 | xz-utils (5.2.2-1.3) | xz-utils- 5.2.4-1ubuntu1 | xz-utils- 5.2.4-1ubuntu1 | xz-utils -5.2.4-1ubuntu1.1 | xz-utils -5.2.4-1ubuntu1.1 | xz-utils -5.2.4-1ubuntu1.1 | xz-utils -5.2.5-2ubuntu1 | xz-utils-5.2.5-2ubuntu1 | xz-utils-5.2.5-2ubuntu1 |
| perl | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA |
| cpp | cpp-7- 7.5.0-3ubuntu1~18.04 | cpp-7- 7.5.0-3ubuntu1~18.04 | cpp-7- 7.5.0-3ubuntu1~18.04 | cpp-7- 7.5.0-3ubuntu1~18.04 | cpp-7- 7.5.0-3ubuntu1~18.04 | cpp-7-4:7.4.0-1ubuntu2.3 | cpp-9.4.0-1ubuntu1~20.04.1 | cpp-9- 4:9.3.0-1ubuntu2~20.04.1 | cpp-4:9.3.0-1ubuntu2 | cpp-9- 9.4.0-1ubuntu1~20.04.1 | cpp-9.4.0-1ubuntu1~20.04.1 | cpp-11.3.0-1ubuntu1~22.04 | cpp-11 - 11.3.0-1ubuntu1~22.04 | cpp-11.3.0-1ubuntu1~22.04 |
| patch | patch - 2.7.6-2ubuntu1 | patch - 2.7.6-2ubuntu1 | patch- 2.7.6-2ubuntu1.1 | patch- 2.7.6-2ubuntu1.1 | patch- 2.7.6-2ubuntu1.1 | patch- 2.7.6-2ubuntu1.1 | patch- 2.7.6-6 | patch- 2.7.6-6 | patch- 2.7.6-6 | patch-2.7.6-6 | patch- 2.7.6-6 | patch-2.7.6-7build2 | patch-2.7.6-7build2 | patch-2.7.6-7build2 |
| python3- GitPython(python3-git) | python3-git (2.1.8-1) | python3-git (2.1.8-1) | python3-git (2.1.8-1) | python3-git (2.1.8-1) | python3-git (2.1.8-1) | python3-git (2.1.8-1) | python3-git (2.1.8-1) | python3-git (2.1.8-1) | NA | NA | NA | NA | NA | NA |
| python3-jinja2 | NA | NA | NA | NA | python3-jinja2 2.10-1ubuntu0.18.04.1 | python3-jinja2 -2.10-1ubuntu0.18.04.1 | python3-jinja2 -2.10.1-2 | python3-jinja2 -2.10.1-2 | python3-jinja2 | python3-jinja2 | NA | python3-jinja2 - 3.0.3-1 | python3-jinja2 - 3.0.3-1 | python3-jinja2-3.0.3-1 |
| python3-pexpect | NA | NA | NA | NA | python3-pexpect (4.2.1-1) | python3-pexpect (4.2.1-1) | python3-pexpect -4.6.0-1build1 | python3-pexpect -4.6.0-1build1 | NA | NA | NA | NA | NA | python3-4.8.0-2ubuntu1 |
| diffutils | diffutils 1:3.6-1 | diffutils-1:3.6-1 | diffutils-1:3.6-1 | diffutils-1:3.6-1 | diffutils-1:3.6-1 | diffutils-1:3.6-1 | diffutils-1:3.7-3 | diffutils-1:3.7-3 | diffutils-1:3.7-3 | diffutils-1:3.7-3 | diffutils-1:3.7-3 | diffutils-1:3.8-0ubuntu2 | diffutils-1:3.8-0ubuntu2 | diffutils-1:3.8-0ubuntu2 |
| ccache | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA |
| which | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA |
| debianutils | NA | NA | debianutils (4.8.4) | debianutils (4.8.4) | debianutils (4.8.4) | debianutils (4.8.4) | debianutils (4.9.1) | debianutils (4.9.1) | debianutils (4.9.1) | NA | NA | debianutils 5.5-1ubuntu2 | debianutils -5.5-1ubuntu2 | debianutils-5.5-1ubuntu2 |
| iputils-ping | NA | iputils-ping 3:20161105-1ubuntu2 | iputils-ping 3:20161105-1ubuntu3 | iputils-ping 3:20161105-1ubuntu3 | iputils-ping 3:20161105-1ubuntu3 | iputils-ping-3:20161105-1ubuntu3 | iputils-ping-3:20190709-3 | iputils-ping-3:20190709-3 | iputils-ping-3:20190709-3 | iputils-ping-3:20190709-3 | iputils-ping-3:20190709-3 | iputils-ping -3:20211215-1 | iputils-ping-3:20211215-1 | iputils-ping-3:20211215-1 |
| libegl1-mesa | libegl1-mesa 20.0.8-0ubuntu1~18.04.1 | libegl1-mesa 20.0.8-0ubuntu1~18.04.1 | libegl1-mesa 20.0.8-0ubuntu1~18.04.1 | libegl1-mesa 20.0.8-0ubuntu1~18.04.1 | libegl1-mesa 20.0.8-0ubuntu1~18.04.1 | libegl1-mesa-20.0.8-0ubuntu1~18.04.1 | libegl1-mesa 21.2.6-0ubuntu0.1~20.04.2 | libegl1-mesa 21.2.6-0ubuntu0.1~20.04.2 | NA | NA | NA | NA | NA | NA |
| libsdl1.2-dev | libsdl1.2-dev 1.2.15+dfsg2-0.1ubuntu0.2 | libsdl1.2-dev 1.2.15+dfsg2-0.1ubuntu0.2 | libsdl1.2-dev 1.2.15+dfsg2-0.1ubuntu0.2 | libsdl1.2-dev 1.2.15+dfsg2-0.1ubuntu0.2 | libsdl1.2-dev 1.2.15+dfsg2-0.1ubuntu0.2 | libsdl1.2-dev 1.2.15+dfsg2-0.1ubuntu0.2 | libsdl1.2-dev 1.2.15+dfsg2-0.1ubuntu0.5 | libsdl1.2-dev 1.2.15+dfsg2-0.1ubuntu0.5 | NA | NA | NA | NA | NA | NA |
| pylint3 | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA |
| python3 | python3 -3.6.5-3ubuntu1 | python3- 3.6.7-1~18.04 | python3 (3.6.7-1 ~18.04) | python3-3.6.7-1~18.04 | python3 -3.6.7-1~18.04 | python3 (3.6.7-1 ~18.04) | python3-3.8.2-0ubuntu2 | python3-3.8.2-0ubuntu2 | python3 3.8.2-0ubuntu2 | python3 -3.8.2-0ubuntu2 | python3-3.8.2-0ubuntu2 | python3 -3.10.6-1~22.04 | python3-3.10.4-0ubuntu2 | python3-3.10.6-1~22.04 |
| cpio | cpio-2.12+dfsg-6 | NA | cpio-2.12+dfsg-6ubuntu0.18.04.1 | cpio-2.12+dfsg-6ubuntu0.18.04.1 | cpio-2.12+dfsg-6ubuntu0.18.04.1 | cpio -2.12+dfsg-6ubuntu0.18.04.4 | cpio-2.13+dfsg-2 | cpio -2.13+dfsg-2 | cpio-2.13+dfsg-2ubuntu0.3 | cpio -2.13+dfsg-2ubuntu0.3 | cpio-2.13+dfsg-2ubuntu0.3 | cpio-2.13+dfsg-7 | cpio - 2.13+dfsg-7 | cpio -2.13+dfsg-7 |
| git-core | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA |
| tftp-server | tftpd-hpa | tftpd-hpa | tftpd-hpa | tftpd-hpa | tftpd-hpa | tftpd-hpa | tftpd-hpa | tftpd-hpa | tftpd-hpa | NA | NA | NA | NA | NA |
| gnupg | gnupg-2.2.4-1ubuntu1.1 | gnupg-2.2.4-1ubuntu1.2 | gnupg - 2.2.4-1ubuntu1.2 | gnupg-2.2.4-1ubuntu1.2 | gnupg-2.2.4-1ubuntu1.4 | gnupg-2.2.4-1ubuntu1.4 | gnupg-2.2.19-3ubuntu2.1 | gnupg-2.2.19-3ubuntu2.1 | gnupg- 2.2.19-3ubuntu2.2 | gnupg- 2.2.19-3ubuntu2.2 | gnupg-2.2.19-3ubuntu2.2 | gnupg -2.2.27-3ubuntu2 | gnupg-2.2.27-3ubuntu2.1 | gnupg-2.2.27-3ubuntu2.1 |
openSUSE/AlmaLinux OS Versions
| Tool/Library | Opensuse Leap 15.3 Desktop /Server (64-bit) | Opensuse Leap 15.4 Desktop /Server (64-bit) | Almalinux 8.7 Desktop /Server (64-bit) | Almalinux 9.1 Desktop /Server (64-bit) |
|---|---|---|---|---|
| ip (iproute) | iproute2-5.3-5.5.1 | iproute2-5.14-150400 | iproute -5.18.0-1 | iproute2-6.1.0-1.el9 |
| gawk | gawk-4.2.1-1.41 | gawk-4.2.1-1.41 | gawk-4.2.1-4.el8 | gawk-5.1.0-6.el9 |
| gcc | gcc-7-3.9.1 | gcc - 7-3.9.1 | gcc-8.5.0-16 | gcc - 11.3.1-4.3.el9 |
| netstat (net-tools) | net-tools-deprecated-2.0+git20170221.479bb4a-3.11 | net-tools -2.0+git20170221.479bb4a-3.11 | net-tools -2.0-0.52.20160912git | net-tools -2.0-0.62.20160912git.el9 |
| ncurses-devel(libncurses5-dev) | ncurses -devel-6.1-150000.5.12.1 | ncurses - 6.1-5.9.1 | ncurses - 3.14.3-bp153.1.25 | ncurses-6.2-8.20210508 |
| zlib-devel(also,install 32-bit of this version) | zlib-1.2.11-150000.3.36.1 | NA | zlib-devel-1.2.11-21.el8_7 | zlib-devel-1.2.11-39.el9 |
| openssl-devel | openssl- 1_1-1.1.1d-150200.11.54.1 | openssl- 1_1-1.1.1l-150400.5.14 | openssl- 1:1.1.1k-7.el8_6 | openssl- 1:3.0.7-17.el9_2 |
| flex | flex - 2.6.4-3.157 | NA | NA | flex - 2.6.4-3.157 |
| bison | bison- 3.0.4-3.3.1 | bison- 3.0.4-3.3.1 | NA | bison- 3.0.4-3.3.1 |
| libselinux | libselinux -3.0-1.31 | libselinux - 3.0-1.31 | libselinux -1:1.1.1k-7 | libselinux -3.5-1.el9 |
| xterm | xterm-330-150200.11.6.1 | xterm- 330-150200.11.6.1 | xterm-331-1.el8_3.2 | xterm-366-8.el9 |
| autoconf | autoconf - 2.69-1.445 | autoconf - 2.69-1.445 | autoconf-2.69-29 | autoconf - 2.69-38.el9 |
| libtool | libtool -2.4.6-3.4.1 | libtool -2.4.6-3.4.1 | libtool -2.4.6-25 | libtool -2.4.6-45.el9 |
| texinfo | texinfo- 6.5-4.17 | texinfo- 6.5-4.17 | texinfo-6.5-7 | texinfo- 6.7-15 |
| zlib1g-dev | NA | NA | NA | NA |
| gcc-multilib | NA | NA | NA | NA |
| build-essential | NA | NA | NA | NA |
| SDL-devel | NA | NA | NA | NA |
| glibc-devel | glibc-devel-2.31-150300.41.1 | glibc-devel 2.31-150300.41.1 | glibc-devel-2.28-211 | glibc-devel-2.34-60.el9 |
| glib2-devel | glib2-devel - 2.62.6-150200.3.9.1 | glib2-devel - 1.1.13-150200.4.26.1 | glib2-devel-2.56.4-159 | glib2-devel -2.68.4-6.el9 |
| automake | automake-1.15.1-4.10.2 | automake | package | 1.15.1-4.10.2 | automake-1.16.1-7 | automake-1.16.2-6.el9 |
| screen | screen-4.6.2-5.3.1 | screen-4.6.2-5.3.1 | NA | NA |
| pax | NA | NA | pax-utils - 1.2.2-bp153.1.16 | NA |
| libstdc++ | libstdc++6-6-12.2.1+git416-150000.1.5.1 | libstdc++-6-11.2.1+git610-150000.1.6.6 | NA | NA |
| g++ (gcc-c++) | NA | NA | NA | NA |
| python3-pip | python3-pip -20.0.2-150100.6.18.1 | python3-pip -20.0.2-150100.6.18.1 | python3-pip-9.0.3-22 | python3-pip-21.2.3-6.el9 |
| perl-dat-dumper | NA | NA | NA | NA |
| perl-thread-queue | NA | NA | NA | NA |
| perl-Text-ParseWords | NA | NA | NA | NA |
| xz(xz-utils) | NA | NA | NA | NA |
| perl | perl-5.26.1-150300.17.11.1 | NA | NA | NA |
| cpp | cpp - 7-3.9.1 | cpp - 7-3.9.1 | cpp-8.5.0-16 | cpp -11.3.1-4.3.el9.alma |
| patch | NA | NA | NA | NA |
| python3- GitPython(python3-git) | NA | python3-GitPython- 3.0.5-bp153.1.18 | NA | python3-GitPython- 3.0.5-bp153.1.18 |
| python3-jinja2 | NA | python3-jinja2-2.10.1-3.10.2 | NA | NA |
| python3-pexpect | python3-pexpect - 4.8.0-5.3.5 | NA | NA | python3-pexpect - 4.8.0-5.3.5 |
| diffutils | diffutils-3.6-4.3.1 | diffutils-3.6-4.3.1 | diffutils-3.6-6 | diffutils-3.7-12.el9 |
| ccache | NA | NA | NA | ccache - 3.4.2-1.9 |
| which | Which -2.21-2.20 | Which-2.21-2.20 | Which-2.21-18 | Which -2.21-28.el9 |
| debianutils | NA | NA | NA | NA |
| iputils-ping | NA | NA | NA | NA |
| libegl1-mesa | NA | NA | NA | NA |
| libsdl1.2-dev | NA | NA | libSDL-1_2-0 - 1.2.15-150000.3.19.1 | NA |
| pylint3 | pylint - 1.8.2-150000.3.3.1 | NA | pylint - 1.8.2-150000.3.3.1 | NA |
| python3 | python3 - 3.6.15-150300.10.30.1 | python3 - 3.6.15-150300.10.30.1 | python3 -3.0.7-4 | python3 -3.9.16-1.el9_2.1 |
| cpio | cpio -2.12-3.9.1 | cpio -2.13-150400.1.98 | cpio -2.12-11 | cpio -2.13-16.el9 |
| git-core | git-core-2.35.3-150300.10.18.1 | git-core - 2.35.3-150300.10.18.1 | NA | NA |
| tftp-server | tftp-server -4.3.1-1.99 | tftp-server-4.4.0-150400.1.9 | NA | NA |
| gnupg | NA | NA | GnuPG-Interface -0.52-bp153.1.3 | NA |