top of page
.png)
Zynq-7000 + AXI Slave with Interrupt Hello World on a ZC702
This post lists step-by-step instructions for creating an AXI slave with an interrupt using Vivado HLS, integrating the slave into a...
Zynq-7000 + AXI Slave Hello World
This post shows how to create a Xilinx Zynq-7000 + AXI slave in Vivado 2018.2 and read/write the AXI slave from the ARM9 of the Zynq-7000...
Set up the JTAG and Serial Port on the ZC702
This post shows you how to connect the JTAG and serial port of the ZC702, where to get the USB-to-serial port driver and how to configure...
Run Hello World on a ZC702
This post shows how run Hello World on a Xilinx ZC702. It covers: creating a design in Vivado, exporting the design to the SDK and...
Bare-Metal Application Boot from Flash on the Xilinx Zynq-7000 of the ZC702
This post lists how to create a complete bare-metal application that boots from the Micron Quad SPI and what happens during boot. The...
bottom of page