Enable 2019.1 Xilinx SDK BSP Symbols
This post shows how to enable symbols in a 2019.1 Xilinx BSP. Remember! You can enable syms in the fsbl or the fsbl_bsp, but not both....
Embedded platform development and maintenance
Search
Zach Pfeffer
- Sep 11, 2021
- 1 min
Add an embeddedsw Driver to a 2019.1 BSP From the Command Line
This post demonstrates how you can manually add an embeddedsw driver to an XSDK FSBL BSP. Steps XP=~/xsdk/SDK/2019.1...
165 views0 comments
Zach Pfeffer
- Sep 6, 2021
- 2 min
Command Line 2019.1 Xilinx FSBL Rebuild and Test
This post demonstrates HOWTO rebuild and test the 2019.1 Xilinx FSBL
270 views0 comments
Zach Pfeffer
- Aug 10, 2021
- 4 min
PetaLinux 2018.1 in Docker
This post describes how to install and run Docker and build PetaLinux 2018.1 in a Docker container.
895 views0 comments
Zach Pfeffer
- Aug 8, 2021
- 2 min
Boot the 2020.1 FSBL in QEMU
This write-up shows how to boot the 2020.1 FSBL in QEMU. It also shows how to recompile the FSBL from PetaLinux 2020.1.
762 views0 comments
Zach Pfeffer
- Jul 19, 2021
- 1 min
ZCU102 Memory Map
This post's table contains: (1) A memory map of the Zynq UltraScale+ MPSoC, (2) An overlay of the Linux kernel, U-Boot, PMUFW, FSBL, and...
826 views0 comments
Zach Pfeffer
- Jul 18, 2021
- 19 min
Log: 2019.1 PetaLinux JTAG Boot U-Boot & Boot Linux
This post lists the output from a successful verbose PetaLinux Tools 2019.1 JTAG boot & subsequent Linux kernel boot from an image.ub on...
563 views0 comments
Zach Pfeffer
- Jul 18, 2021
- 1 min
Zynq UltraScale+ MPSoC Memory Map
This post lists the memory map of the Zynq UltraScale+ MPSoC. Links Zynq UltraScale+ Device Technical Reference Manual UG1085 (v2.2)...
2,203 views0 comments
Zach Pfeffer
- Jun 19, 2021
- 1 min
Table of Xilinx FPGAs from xilinx.com
This post lists Xilinx FPGAs listed at [https://www.xilinx.com/products/silicon-devices/fpga.html] sorted by nm, overview page links, and...
272 views0 comments
Zach Pfeffer
- Jun 14, 2021
- 3 min
Enable socat Using Petainux 2019.1 and Test it on the ZCU102
This post shows how to enable socat in a PetaLinux 2019.1 build.
390 views0 comments